Sketcher: Raccordo
Raccordo |
Posizione nel menu |
---|
Sketch → Geometrie → Raccordo |
Ambiente |
Sketcher |
Avvio veloce |
F |
Introdotto nella versione |
- |
Vedere anche |
Nessuno |
Descrizione
Questo strumento crea un raccordo tra due linee unite in un punto. Attivare lo strumento, quindi selezionare entrambe le linee o fare clic sul punto d'angolo.
introduced in version 1.0: If two straight edges connected by a Coincident constraint are filleted or chamfered, the corner point can optionally be preserved by adding a Point object that has a Point on object constraint with both edges. Constraints connected to the corner point are then transferred to the new point object.
Utilizzo
See also: Drawing aids.
- Avviare lo strumento
- Selezionare le linee collegate da raccordare, oppure selezionare un vertice. La distanza dal vertice a cui si fa clic imposta il raggio del raccordo.
- Per modificare il raggio selezionare il centro del raccordo e spostarlo.
- Premere il tasto Esc o fare clic con il tasto destro per terminare l'operazione e uscire dalla funzione.
Notes
- The construction geometry arc of a chamfer is not visible outside the sketch. It cannot be deleted without breaking the geometry of the chamfer.
- Some (conic) curves may need to be trimmed before they can be filleted.
- The fillet radius depends on the selection method. If a Coincident constraint connecting two straight edges is selected, the fillet radius is derived from the length of the shortest edge. If two edges are selected the radius is the distance from the first clicked point to the (extended) intersection of the edges.
Sketcher
- General: Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry
- Sketcher constraints:
- Dimensional constraints: Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock
- Geometric constraints: Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block
- Other constraints: Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher visual: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub