Sketcher: Copia carbone
Copia carbone |
Posizione nel menu |
---|
Sketch → Geometrie → Copia carbone |
Ambiente |
Sketcher |
Avvio veloce |
Nessuno |
Introdotto nella versione |
0.17 |
Vedere anche |
Nessuno |
Descrizione
Lo strumento Copia carbone copia tutta la geometria e i vincoli di un altro schizzo nello schizzo attivo.
Dimensional constraints which exist before the copy function remain linked to the original sketch's dimensional constraints through expressions.
Utilizzo
- Premere il pulsante Copia carbone.
- Fare clic su un bordo dell'altro schizzo.
- Gli elementi geometrici e i vincoli vengono copiati nello schizzo.
- Se lo schizzo da copiare non si trova su un piano parallelo allo schizzo attivo, il puntatore del mouse si trasformerà in un segno di interdizione. Premere Ctrl+Alt per consentire la selezione di uno schizzo non parallelo. L'oggetto viene quindi adattato al nuovo piano degli schizzi. (notaː al momento della scrittura richiede il salvataggio e la ricarica del documento per renderlo visibile).
- Se lo schizzo da copiare non si trova nel corpo attivo, il puntatore del mouse si trasforma in un segno di interdizione. Premere Ctrl per consentire la selezione di uno schizzo da un altro corpo. Se lo schizzo estraneo si trova su un piano diverso, utilizzareː Ctrl+Alt per copiare da un altro piano.
- Premere Esc o premere il tasto destro del mouse per terminare la funzione.
Notes:
- When sketches are used in the PartDesign Workbench, normally the sketch to carbon copy should be in the same PartDesign Body as the currently active sketch. If the sketch to be copied is not in the active Body, the mouse pointer will not allow selection. In this case, hold Ctrl to allow selection of sketches from other Bodies.
- Normally, the sketch to select should be in a plane that is parallel to the currently active sketch. If the sketch to be copied is not parallel to the currently active sketch, hold Ctrl+Alt to allow selection of non-parallel sketches. The object will then be adjusted to the active sketch's plane. Noteː as of this writing this needs a save and reload of the document to make it visible. This works for sketches located outside of the currently active Body as well.
- If the Sketcher mode has been changed to construction mode using Toggle Construction all copied geometry will be created in construction mode.
Limitazioni
- Viene copiato tutto il contenuto dello schizzo; non è possibile selezionare solo una parte di esso.
Sketcher
- General: Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry
- Sketcher constraints:
- Dimensional constraints: Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock
- Geometric constraints: Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block
- Other constraints: Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher visual: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub