Sketcher: Interrompi l'operazione

From FreeCAD Documentation
Revision as of 23:24, 6 December 2023 by Marco T (talk | contribs) (Created page with "{{GuiCommand/it |Name=Sketcher StopOperation |Name/it=Sketcher Interrompi operazione |MenuLocation=Schizzo → Interrompi operazione |Workbenches=Sketcher }}")

Sketcher Interrompi operazione

Posizione nel menu
Schizzo → Interrompi operazione
Ambiente
Sketcher
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Description

Stop operation stops a currently active command while a sketch is being edited; this may mean a drawing operation, a constraining operation, a B-spline operation, etc.

This is similar to pressing the Esc key.

Usage

  1. Make sure a sketch is in Edit mode.
  2. Make sure a tool is active such as Create polyline, Constrain distance Y, or Move.
  3. Choose Sketch → Stop operation from the top menu.
  4. The tool is deactivated and the pointer returns to being a simple pointer.