Translations:Sketcher SketchObject/3/it: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Incode|Sketcher::SketchObject}} deriva da Part Part2DObject, il che significa che è un oggetto Part Feature specializzato per l...")
 
No edit summary
 
Line 1: Line 1:
{{Incode|Sketcher::SketchObject}} deriva da [[Part_Part2DObject/it|Part Part2DObject]], il che significa che è un oggetto [[Part Feature/it|Part Feature]] specializzato per la geometria 2D. Come Part2DObject, SketchObject può essere collegato a piani e facce. Inoltre, SketchObject è in grado di gestire i vincoli geometrici delle linee e delle curve disegnate al suo interno.
{{Incode|Sketcher::SketchObject}} deriva da [[Part_Part2DObject/it|Part Part2DObject]], il che significa che è un oggetto [[Part Feature/it|Part Feature]] specializzato per la geometria 2D. Come Part2DObject, anche SketchObject può essere collegato a piani e facce. Inoltre, SketchObject è in grado di gestire i vincoli geometrici delle linee e delle curve disegnate al suo interno.

Latest revision as of 15:24, 1 December 2019

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Sketcher SketchObject)
The {{incode|Sketcher::SketchObject}} is derived from the [[Part_Part2DObject|Part Part2DObject]], which means it is a [[Part Feature|Part Feature]] object specialized for 2D geometry. Like the Part2DObject, the SketchObject can be attached to planes and faces. In addition, the SketchObject can handle geometrical constraints.

Sketcher::SketchObject deriva da Part Part2DObject, il che significa che è un oggetto Part Feature specializzato per la geometria 2D. Come Part2DObject, anche SketchObject può essere collegato a piani e facce. Inoltre, SketchObject è in grado di gestire i vincoli geometrici delle linee e delle curve disegnate al suo interno.