Sketcher ValidateSketch/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "Утилита '''Проверить эскиз''' может использоваться для восстановления эскиза, который больше не...")
(Created page with "==Как использовать==")
Line 18: Line 18:
{{clear}}
{{clear}}


==Как использовать==
==How to use==


# Select the sketch to validate, either from the Model tree, or by clicking on one of its edges in the 3D view. '''Note:''' the sketch must not be in editing mode. If you are in sketch edit mode, you need to [[Sketcher LeaveSketch|exit the sketch]].
# Select the sketch to validate, either from the Model tree, or by clicking on one of its edges in the 3D view. '''Note:''' the sketch must not be in editing mode. If you are in sketch edit mode, you need to [[Sketcher LeaveSketch|exit the sketch]].

Revision as of 03:08, 8 July 2019

Проверить эскиз

Системное название
Sketcher Validate
Расположение в меню
Sketch/Part Design → Проверить эскиз...
Верстаки
Sketcher, PartDesign
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Описание

Утилита Проверить эскиз может использоваться для восстановления эскиза, который больше не редактируется, имеет неверные ограничения, или для добавления утерянных ограничений совпадения в эскизе, созданном из импортированной геометрии, такой как файлы DXF. Он также может быть полезен при поиске отсутствующих совпадений в собственных эскизах, которые генерирует ошибку «невозможно проверить сломанную грань» при попытке применить инструмент PartDesign-а.


File:Sketcher validation tasks ru.png

Как использовать

  1. Select the sketch to validate, either from the Model tree, or by clicking on one of its edges in the 3D view. Note: the sketch must not be in editing mode. If you are in sketch edit mode, you need to exit the sketch.
  2. Open the validate sketch utility from the Sketch or Part Design menu.
  3. See Options below for operation.
  4. Press the Close button when done.

Options

Missing coincidences

Finds out missing coincidences for overlapping vertices, and adds them. Press the Find button; a pop up dialog will appear to report how many missing coincidences were found; they will be shown in the 3D view as yellow crosses. Press OK to close the dialog, then press the Fix button to add the missing coincidences.

If necessary, define a larger tolerance value in the drop-down field.

Leave the "Ignore construction geometry" checkbox checked to disregard construction geometry in the analysis.

Invalid constraints

Reversed external geometry

Constraint orientation locking