Sketcher "Выделить конфликтующие ограничения"

From FreeCAD Documentation
This page is a translated version of the page Sketcher SelectConflictingConstraints and the translation is 27% complete.
Outdated translations are marked like this.

Выделить конфликтующие ограничения

Системное название
Sketcher_SelectConflictingConstraints
Расположение в меню
Sketch → Инструменты для эскиза → Выделить конфликтующие ограничения
Верстаки
Sketcher
Быстрые клавиши
Shift+Ctrl+E
Представлено в версии
0.15
См. также
Нет

Описание

The Sketcher SelectConflictingConstraints tool selects the conflicting constraints in the sketch.

If such constraints exist in a sketch the Solver messages section of the Sketcher Dialog displays this message:

  • Over-constrained: (#, #, #)

Where (#, #, #) are the indices of the constraints. Clicking the underlined text will select the conflicting constraints.

Применение

  1. There are several ways to invoke the tool:
    • Click the underlined text in the Sketcher Dialog as described above.
    • Select the Sketch → Sketcher tools → Select conflicting constraints option from the menu.
    • Use the keyboard shortcut: Z then P, then C.
  2. The conflicting constraints are selected.
  3. Optionally click in an empty area in the 3D view to clear the selection.

Notes

  • Conflicting constraints must be removed from the sketch.
  • Instead of the proposed indices it is also possible to delete other constraints.