Sketcher SelectElementsWithDoFs/pt

From FreeCAD Documentation
Revision as of 14:15, 20 April 2024 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Sketcher Select solver DoFs

Localização do menu
Sketch → Ferramentas de esboço (Sketcher) → Select solver DoFs
Bancadas de trabalho
Sketcher
Atalho padrão
Nenhum
Introduzido na versão
0.18
Veja também
Nenhum

Descrição

The Sketcher SelectElementsWithDoFs tool selects the not fully constrained elements in the sketch.

If such elements exist in a sketch the Solver messages section of the Sketcher Dialog displays this message:

  • Under constrained: n DoF(s)

Where n is the remaining number of degrees of freedom. Clicking the underlined text will select the under-constrained elements.

Please note that a sketch can also have under-constrained elements if one of these messages is displayed:

  • Redundant constraints: (#, #, #)
  • Over-constrained: (#, #, #)

Usage

  1. There are several ways to invoke the tool:
    • Click the underlined text in the Sketcher Dialog as described above.
    • Select the Sketch → Sketcher tools → Select unconstrained DoF option from the menu.
    • Use the keyboard shortcut: Z then F.
  2. The under-constrained sketch elements are selected.
  3. Optionally click in an empty area in the 3D view to clear the selection.