Sketcher SelectElementsWithDoFs/pt: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 1: Line 1:
<languages/>
<languages/>
{{Docnav|[[Sketcher_ToggleDrivingConstraint|Toggle reference/driving constraint]]|[[Sketcher CloseShape|Close Shape]]|[[Sketcher_Workbench|Sketcher]]|IconL=Sketcher_ToggleConstraint.png |IconC=Workbench_Sketcher.svg|IconR=Sketcher CloseShape.png‎}}

{{GuiCommand/pt
{{GuiCommand/pt
|Name/pt=Sketcher Select solver DoFs
|Name/pt=Sketcher Select solver DoFs
Line 18: Line 20:
# Click anywhere in the sketch to clear the highlight color.
# Click anywhere in the sketch to clear the highlight color.



[[Category:Sketcher]]

{{Docnav|[[Sketcher_ToggleDrivingConstraint|Toggle reference/driving constraint]]|[[Sketcher CloseShape|Close Shape]]|[[Sketcher_Workbench|Sketcher]]|IconL=Sketcher_ToggleConstraint.png |IconC=Workbench_Sketcher.svg|IconR=Sketcher CloseShape.png‎}}

{{Sketcher Tools navi}}

{{Userdocnavi}}

Revision as of 13:45, 19 February 2019

Sketcher Select solver DoFs

Localização do menu
Sketch → Ferramentas de esboço (Sketcher) → Select solver DoFs
Bancadas de trabalho
Sketcher
Atalho padrão
Nenhum
Introduzido na versão
0.18
Veja também
Nenhum

Descrição

This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).

How to use

  1. In the Solver messages box located at the top of the Tasks tab, the following message should be displayed:

    Under-constrained sketch with X degrees of freedom

    where "X" is the number of degrees of freedom remaining in the sketch; click on the blue link, or use the menu.
  2. The elements which have degrees of freedom are highlighted in green.
  3. Click anywhere in the sketch to clear the highlight color.