Sketcher UnterbestimmteElementeAuswählen

From FreeCAD Documentation
Revision as of 08:33, 1 May 2024 by FBXL5 (talk | contribs)

Sketcher UnterbestimmteElementeAuswählen

Menüeintrag
Skizze → Skizzenwerkzeuge → Unterbestimmte Elemente auswählen
Arbeitsbereich
Sketcher
Standardtastenkürzel
Z F
Eingeführt in Version
0.18
Siehe auch
Keiner

Beschreibung

Das Werkzeug Sketcher UnterbestimmteElementeAuswählen Wählt die nicht vollständig bestimmten Elemente der Skizze aus.

If such elements exist in a sketch the Solver messages section of the Sketcher Dialog displays this message:

  • Under constrained: n DoF(s)

Where n is the remaining number of degrees of freedom. Clicking the underlined text will select the under-constrained elements.

Please note that a sketch can also have under-constrained elements if one of these messages is displayed:

  • Redundant constraints: (#, #, #)
  • Over-constrained: (#, #, #)

Anwendung

  1. There are several ways to invoke the tool:
    • Click the underlined text in the Sketcher Dialog as described above.
    • Select the Sketch → Sketcher tools → Select unconstrained DoF option from the menu.
    • Use the keyboard shortcut: Z then F.
  2. The under-constrained sketch elements are selected.
  3. Optionally click in an empty area in the 3D view to clear the selection.