Sketcher NewSketch/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "Это создаст новый эскиз.")
No edit summary
Line 12: Line 12:
==Описание==
==Описание==


Это создаст новый [[Sketcher Workbench|эскиз]].
Этот инструмент создаст новый [[Sketcher Workbench|эскиз]].


Note that the [[PartDesign Workbench|PartDesign workbench]] has its own [[PartDesign NewSketch|new sketch]] command, when using PartDesign it is preferable to use its own dedicated tool.
Note that the [[PartDesign Workbench|PartDesign workbench]] has its own [[PartDesign NewSketch|new sketch]] command, when using PartDesign it is preferable to use its own dedicated tool.

Revision as of 03:13, 4 July 2019

Создать эскиз

Системное название
Sketcher NewSketch
Расположение в меню
Sketch → Создать эскиз
Верстаки
Sketcher
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Разместить эскиз на грани..., Переориентировать эскиз...

Описание

Этот инструмент создаст новый эскиз.

Note that the PartDesign workbench has its own new sketch command, when using PartDesign it is preferable to use its own dedicated tool.

How to use

Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the

  • XY-Plane
  • XZ-Plane
  • YZ-Plane

You can change an offset to any of the three planes and the side of the offset.

Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.

Note

The sketch can be re-mapped to another already existing face using the Map Sketch - Command.

The sketch can be moved in the 3D-Space using Placement.