Sketcher CreateLine/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "==Описание==")
(Created page with "Этот инструмент рисует линию, выбирая две точки в 3D-виде. При запуске инструмента указатель мыш...")
Line 14: Line 14:




Этот инструмент рисует линию, выбирая две точки в 3D-виде.
This tool draws a line by picking two points in the 3D view.
При запуске инструмента указатель мыши меняется на белый крест с иконкой красной линии. Кроме того, координаты отображаются в режиме реального времени.
When starting the tool, the mouse pointer changes to a white cross with a red line icon. Besides are coordinates shown in real time.


[[Image:Sketcher_LineExample1.png‎]]
[[Image:Sketcher_LineExample1.png‎]]

Revision as of 08:29, 9 July 2019

Sketcher Line

Системное название
Sketcher CreateLine
Расположение в меню
Sketch → Геометрия эскиза → Создать линию
Верстаки
Sketcher
Быстрые клавиши
L
Представлено в версии
-
См. также
Sketcher Polyline

Описание

Этот инструмент рисует линию, выбирая две точки в 3D-виде. При запуске инструмента указатель мыши меняется на белый крест с иконкой красной линии. Кроме того, координаты отображаются в режиме реального времени.

The created line object starts and ends at the given points, but the line is infinite regarding the constraints Tangent, Point On Object and Internal Angle. This means for example, that a point with the constraint Point On Object may not be located between the two given points but can lie outside of the two points on the extension of the drawn line.


How to use

  • Pick points on an empty area of the 3d view, or on an existing object (auto constraints must be active in TaskView).
  • Pressing Esc or clicking the right mouse button cancels the function.