Sketcher: Constrângere de tangență
Sketcher ConstrainTangent |
Menu location |
---|
Sketch → Sketcher constraints → Constrain tangent |
Workbenches |
Sketcher |
Default shortcut |
T |
Introduced in version |
- |
See also |
Constraint point on object |
Description
Descriere
Tangent Constraint makes two curves to touch each other (be tangent). Lines are treated infinite, and arcs are treated as full circles/ellipses. The constraint is also capable of connecting two curves, forcing them tangent at the joint, thus making the joint smooth.
Tangent Constraint can also be used with two lines to make them colinear.
Usage
Cum se folosește
sunt patru moduri diferite în cae contrângerea poate fi aplicată:
- between two curves (available not for all curves)
- between two endpoints of a curve, making a smooth joint
- between a curve and an endpoint of another curve
- between two curves at user-defined point
Pentru a aplica constrângerile de tangență, trebuie să urmați pașii:
- Select two or three entities in the sketch.
- Invoke the constraint by clicking its icon on the toolbar, or selecting the menu item, or using keyboard shortcut.
Între două curbe (direct tangency)
două curbe vor fi făcute tangente, and the point of tangency will be implicit. This mode is applied if two curves were selected.
Accepted selection:
- line + line, circle, arc, ellipse, arc-of-ellipse
- circle, arc + circle, arc
Dacă nu este acceptată tangența directă între curbele selectate (de exemplu, între un cerc și o elipsă), va fi adăugat un punct de ajutor pentru a schița automat și se va aplica tangența-prin-punct.
Nu se recomandă reconstruirea punctului de tangență prin crearea unui punct și constrângerea lui de a se afla pe ambele curbe. It will work, but the convergence will be seriously slower, jumpier, and will require about twice as many iterations to converge than normal. Use other modes of this constraint if the point of tangency is needed.
Între două puncte finale (point-to-point tangency)
În acest mod, punctele finale se fac coincidente, and the joint is made tangent (C1-smooth, or "sharp", depending on the placement of curves before the constraint is applied). Acest mod se aplică atunci când au fost selectate două puncte finale de două curbe.
Accepted selection:
- endpoint of line/arc/arc-of-ellipse + endpoint of line/arc/arc-of-ellipse (i.e., two endpoints of any two curves)
Între curbă și punct final (point-to-curve tangency)
În acest mod, un punct final al unei curbe este constrâns să stea pe cealaltă curbă, and the curves are forced tangent at the point. This mode is applied when a curve and an endpoint of another curve were selected.
Accepted selection:
- line, circle, arc, ellipse, arc-of-ellipse + endpoint of line/arc/arc-of-ellipse (i.e., any curve + endpoint of any curve)
Între două curbe la punct (tangent-via-point) (v0.15)
În acest mod, două curbe sunt tangente și punctul de tangență este urmărit. Acest mod se aplică atunci când au fost selectate două curbe și un punct.
Accepted selection:
- any line/curve + any line/curve + any point
"Any point" can be a lone point, or a point of something, e.g. a center of a circle, an endpoint of an arc, or the origin.
Pentru ca constrângerea să funcționeze corect, punctul trebuie să fie pe ambele curbe.So, as the constraint is invoked, the point will be automatically constrained onto both curves (helper constraints will be added, if necessary), and the curves will be forced tangent at the point. These helper constraints are plain regular constraints. They can be added manually, or deleted.
În comparație cu tangența directă, această constrângere este mai lentă, deoarece există mai multe grade de libertate implicate, dar dacă este necesar punctul de tangență, acesta este modul recomandat deoarece oferă o convergență mai bună comparativ cu tangența directă + punct pe două curbe.
Plasarea punctului înaintea aplicării constrângerii este o sugestie pentru rezolvitor pentru locul unde ar trebui să fie tangența. Cu această constrângere, se pot constrânge două elipse să se atingă reciproc în două locuri.
Between two lines (collinear)
Accepted selection:
- any line/vertex + any line/vertex
Script
Tangent Constraint poate fi creată din macros și din consola python folosind următoarele:
# direct tangency
Sketch.addConstraint(Sketcher.Constraint('Tangent',icurve1,icurve2))
# point-to-point tangency
Sketch.addConstraint(Sketcher.Constraint('Tangent',icurve1,pointpos1,icurve2,pointpos2))
# point-to-curve tangency
Sketch.addConstraint(Sketcher.Constraint('Tangent',icurve1,pointpos1,icurve2))
# tangent-via-point (plain constraint, helpers are not added automatically)
Sketch.addConstraint(Sketcher.Constraint('TangentViaPoint',icurve1,icurve2,geoidpoint,pointpos))
unde:
- Sketch is a sketch object
- icurve1, icurve2 are two integers identifying the curves to be made tangent. The integers are indexes in the sketch (the value, returned by Sketch.addGeometry).
- pointpos1, pointpos2 should be 1 for start point and 2 for end point.
- geoidpoint and pointpos in TangentViaPoint are the indexes specifying the point of tangency.
The Sketcher scripting page explains the values which can be used for incurve1
, incurve2
, pointpos1
, pointpos2
, geoidpoint
and pointpos
and contains further examples on how to create constraints from Python scripts.
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub