Sketcher: Seleziona i vincoli in conflitto

From FreeCAD Documentation
Revision as of 00:13, 3 December 2018 by Renatorivo (talk | contribs) (Replaced content with "== Utilizzo ==")

Seleziona i vincoli in conflitto

Posizione nel menu
Sketch → Strumenti → Seleziona i vincoli in conflitto
Ambiente
Sketcher
Avvio veloce
Shift+Ctrl+E
Introdotto nella versione
0.15
Vedere anche
Nessuno

Descrizione

Seleziona i vincoli in conflitto di uno schizzo.


Utilizzo

  1. Enter edit mode of sketch.
  2. Choose Sketch Sketcher tools Select Conflicting Constraints from the top menu.
  3. The conflicting constraints of the sketch will be selected.