Translations:SheetMetal AddBase/9/en

From FreeCAD Documentation
  1. Select an open contour sketch.
  2. Activate the SheetMetal AddBase command using one of the following:
    • The Make Base Wall button.
    • The SheetMetal → Make Base Wall menu option.
    • The keyboard shortcut: C then B.
  3. Adjust the profile's parameters by editing the corresponding values in the Property editor:
    • The property Datalength for the profile length,
    • The property Datathickness for the profile thickness,
    • The property Dataradius for the inner radius of the bends.