From FreeCAD Documentation
- ViewArrow Size (
Length
): specifies the size of the symbols displayed at the ends of the dimension line or arc.
- ViewArrow Type (
Enumeration
): specifies the type of symbol displayed at the ends of the dimension line or arc, which can be Dot
, Circle
, Arrow
, Tick
or Tick-2
.
- ViewDim Overshoot (
Distance
): specifies the additional length added to the dimension line. Not used for angular dimensions.
- ViewExt Lines (
Distance
): specifies the length of the extension lines that go from the dimension line to the measured points. Use 0
for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions.
- ViewExt Overshoot (
Distance
): specifies the additional length of the extension lines beyond the dimension line. Not used for angular dimensions.
- ViewFlip Arrows (
Bool
): specifies whether to flip the orientation of the symbols at the ends of the dimension line or arc. Only works if the symbols are arrows.
- ViewLine Color (
Color
): specifies the color of the dimension line or arc, and the arrows.
- ViewLine Width (
Float
): specifies the width of the lines or arc belonging to the dimension.
- ViewShow Line (
Bool
): specifies whether to display the dimension line. Does not affect the display of extension lines and overshoots. Not used for angular dimensions.