Translations:CAM Drilling/6/en

From FreeCAD Documentation
  1. There are several ways to invoke the command:
    • Press the CAM Drilling button.
    • Select the CAM → Drilling option from the menu.
  2. In the Operation section:
    • Select a ToolController.
    • Select a Coolant Mode.
    • Optionally enable and adjust the following:
      • Peck set the Depth.
      • Dwell set the Time in seconds.
      • Extended Depth.
  3. In the Base Geometry section confirm that the list matches the holes that are intended for processing, and adjust add, enable, or disable, as necessary. Holes can be added by selecting the wall faces of the Holes.
  4. In the Depths section check, and if required adjust, the Start Depth and Final Depth.
  5. In the Heights section check, and if required adjust, the Safe Height and the Clearance Height.
  6. Press the OK button to generate the drilling path(s).