Workbenches/ワークベンチ

From FreeCAD Documentation
Revision as of 12:11, 28 December 2021 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

RevitCatiaといった多くの現代的なデザインのためのアプリケーションと同様、FreeCADはワークベンチというコンセプトを基盤にしています。ワークベンチとは言うなれば特定の作業のために特別に編成されたツールのセットです。伝統的な家具工房では木材を扱う者のための作業台や金属部品を扱う者のための作業台があり、恐らくは全ての部品を一つに組み立てる者のための作業台もあったことでしょう。

FreeCAD, like many modern design applications such as Revit or CATIA, is based on the concept of Workbench. A workbench can be considered as a set of tools specially grouped for a certain task. In a traditional furniture workshop, you would have a work table for the person who works with wood, another one for the one who works with metal pieces, and maybe a third one for the guy who mounts all the pieces together.

FreeCADでは同じ考え方を採用しています。関係する作業に従ってツールはワークベンチにグループ化されているのです。

あるワークベンチから別のワークベンチに切り替えると、そのインタフェースで利用できるツールが変わります。

ワークベンチを切り替えるとインターフェイスが変わってそのツールが利用可能になります。ツールバー、コマンドバー、さらにはインターフェイスの他の部分も新しいワークベンチに切り替わりますが、シーンの内容は変わりません。例えば製図ワークベンチで2D形状を描画し、さらにパートワークベンチを使ってそこから作業を続けるといったことが可能です。

ワークベンチは「モジュール」と呼ばれることがあります。ただし、ワークベンチとモジュールは別のエンティティです。モジュールはFreeCADを拡張したものですが、ワークベンチはツールバーやメニューをまとめた特別なGUI設定です。通常、すべてのモジュールには独自のワークベンチが含まれているため、名前を交差使用しています。

ビルトインワークベンチ

今のところ以下のワークベンチが利用可能になっています:

  • Std Base. This is not really a workbench, but rather a category of 'standard' commands and tools that can be used in all workbenches.
  • The FEM Workbench provides Finite Element Analysis (FEA) workflow.
  • The Inspection Workbench is made to give you specific tools for examination of shapes. It is still under development.
  • The Path Workbench is used to produce G-Code instructions. It is still under development.
  • The Reverse Engineering Workbench is intended to provide specific tools to convert shapes/solids/meshes into parametric FreeCAD-compatible features. It is still under development.

Deprecated

The following workbenches are still included in the base installation for compatibility purposes, but they should no longer be used.

External workbenches

FreeCADワークベンチはPythonでプログラムするのが簡単です。したがって、FreeCADの主な開発者の外に追加のワークベンチを開発する人がいます。

The external workbenches page lists all that are known to this community. Most are easily installable from within FreeCAD, using the Addon Manager, found under menu Tools → Addon manager.

複数の新しいワークベンチが開発中です。お楽しみに!

Property/ja
Mesh Workbench/ja