Jump to content

Editing Translations:Reinforcement StirrupRebar/6/pl

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Reinforcement StirrupRebar)
# Select any face of a previously created {{Button|[[Image:Arch_Structure.svg|16px]] [[Arch_Structure|Structure]]}} object.
# Then select {{Button|[[Image:Reinforcement_StirrupRebar.svg|16px]] [[Reinforcement_StirrupRebar|Stirrup]]}} from the rebar tools.
# A [[Task_Panel|task panel]] will pop-out on the left side of the screen as shown below.
# Select the desired orientation.
# Populate the inputs like 'Left Cover', 'Right Cover', 'Top Cover', 'Bottom Cover', 'Front Cover', 'Bent Angle', 'Bent Factor', 'Rounding' and 'Diameter' of the rebar.
# Select the mode of distribution either 'Amount' or 'Spacing'.
#* If 'Spacing' is selected, a user can also opt for [[Reinforcement_Custom_Spacing|custom spacing]].
# {{Button|Pick Selected Face}} is used to verify or change the face for rebar distribution.
# Click {{Button|OK}} or {{Button|Apply}} to generate the rebars.
# Click {{Button|Cancel}} to exit the task panel.
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

Please note that all contributions to FreeCAD Documentation are considered to be released under the Creative Commons Attribution (see FreeCAD:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

Formatting help

Cancel Editing help (opens in new window)

Template used on this page: