Jump to content

Editing Translations:Part Slice/35/fr

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Part Slice)
# Switch to [[Image:Workbench_Sketcher.svg|24px]] [[Sketcher_Workbench|Sketcher Workbench]]
#* Create a new sketch.
#* Draw a rectangle that will outline the overall shape of the puzzle.
#* Close the sketch.<br />[[image:slice_example_step1.png|320px]]
# Switch to [[Image:Workbench_Part.svg|24px]] [[Part_Workbench|Part workbench]]. 
#* Select the sketch, and pick {{MenuCommand|Part → [[Image:Part_MakeFace.svg|24px]] [[Part_MakeFace|Make face from wires]]}}.<br />[[image:slice_example_step2.png|320px]]
# Switch back to [[Image:Workbench_Sketcher.svg|24px]] [[Sketcher_Workbench|Sketcher Workbench]]
#* Create another sketch on the same plane. 
#* Using polyline command, draw the lines that will split the puzzle into pieces.<br />[[image:slice_example_step3.png|320px]]
# Switch back to [[Image:Workbench_Part.svg|24px]] [[Part_Workbench|Part Workbench]].
#* Select the splitter sketch, and apply [[Image:Part_BooleanFragments.svg|24px]] [[Part_BooleanFragments|Part Boolean Fragments]]. This will insert vertices where lines of splitter sketch intersect. Having them is essential for the next step to work.<br />[[image:slice_example_step4.png|320px]]
# Select the rectangular face, and the BooleanFragments of splitter sketch, and apply [[Image:Part_Slice.svg|24px]] Part Slice.<br />[[image:slice_example_step5.png|320px]]
# Use [[Image:Part_ExplodeCompound.svg|24px]] [[Part_ExplodeCompound|Part ExplodeCompound]] on the sliced face, to break apart the compound made by Part Slice into individual pieces.
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

Please note that all contributions to FreeCAD Documentation are considered to be released under the Creative Commons Attribution (see FreeCAD:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

Formatting help

Cancel Editing help (opens in new window)

Template used on this page: