Jump to content

Editing Translations:Manual:Preparing models for 3D printing/45/pl

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manual:Preparing models for 3D printing)
* Our next step is to create the 6 extruding cylinders on the top of the Lego block.
* Choose the top face and click on the [[Image:CAM_Pocket_Shape.svg|16px]] [[CAM_Pocket_Shape|Pocket Shape]] button. On the '''Extensions''' tab, enable Extensions and click on the edge of the top face (it should normally be automatically added in the default length box.
* Finally, on the '''Operation''' tab input -1.5 mm in the '''Pass Extension box''' and change the pattern option to a ZigZagOffset.
* Press '''apply''' and then close the tab.
* In a similar manner we can create the three cylinders on the bottom of the Lego piece.
* We can easily visualize the steps followed during the milling of the object by using the [[Image:CAM_SimulatorGL.svg|16px]] [[CAM_SimulatorGL|SimulatorGL]] option.
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

Please note that all contributions to FreeCAD Documentation are considered to be released under the Creative Commons Attribution (see FreeCAD:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

Formatting help

Cancel Editing help (opens in new window)
Retrieved from "http://wiki.freecad.org/Translations:Manual:Preparing_models_for_3D_printing/45/pl"