Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manual:Modeling for product design ) * Now, let's add three more constraints: ** Activate the [[Image:Sketcher_Dimension.svg|16px]] [[Sketcher_Dimension|automatic dimension]] tool, select one of the vertical segments, and set its length to 23.7 mm. ** With the tool still active, select one the horizontal segments, and set its length to 47.7 mm. ** Activate the [[Image:Sketcher_ConstrainSymmetric.svg|16px]] [[Sketcher_ConstrainSymmetric|symmetry constraint]] tool, select the upper left corner point of the rectangle, then the lower right corner point, and finally the origin point (the dot where the red and green axes intersect). This ensures the rectangle stays centered on the origin, limiting its range of movement and providing symmetry across the two axes. * You will now notice that our rectangle has turned green, indicating that it is fully constrained. This means every aspect of the sketch, including its position, size, and shape, is now fully defined and locked in place. It is generally a good practice to ensure that sketches are fully constrained, as this helps maintain control over your design and prevents unintended changes during further operations.
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in or
create an account , your edits will be attributed to your username, along with other benefits.