Jump to content

Editing Translations:Import from STL or OBJ/7/it (section)

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Import from STL or OBJ)
===Closing holes===
You can also manually close holes in your mesh object by
*Selecting your mesh object in the tree view
*Choose {{KEY|Meshes}}  →  {{KEY|Fill holes...}} from the top menu
*Specify maximum number of edges to be filled (3 is default)
*Since STL and OBJ are meshes consisting of triangles the default number of edges should be sufficient
<br />
Another method of manually closing holes in your mesh object would be
*Selecting your mesh object in the tree view
*Choose {{KEY|Meshes}}  →  {{KEY|[[Image:Mesh_FillInteractiveHole.svg|32px]] Close hole}} from the top menu
*Select one of the edges of the hole in the mesh object in the 3D view
*Right-Click in 3D view and choose {{KEY|Leave hole-filling mode}} to exit the command
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

Please note that all contributions to FreeCAD Documentation are considered to be released under the Creative Commons Attribution (see FreeCAD:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

Formatting help

Cancel Editing help (opens in new window)