Translations:FEM tutorial/12/ru: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 1: Line 1:
# Создать новый документ
# Создайте [[Std_New|новый документ]] (нажатием на кнопку [[Image:Std_New.svg|24px|link=Std_New]]).
# Активировать верстак Part
# Активировать [[Image:Workbench_Part.svg|24px|link=Part_Workbench]] [[Part_Workbench|верстак Part]].
# Создать Куб
# Создайте Куб.
# Изменить его размеры ('''Box''') на следующие:
# Измените его '''Размеры''' на следующие:
## Length: 8000 мм
## Length: 8.000 м.
## Width: 1000 мм
## Width: 1.000 м.
## Height: 1000 мм
## Height: 1.000 м.

Revision as of 08:53, 16 August 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (FEM tutorial)
# Press the {{Button|[[Image:Std_New.svg|16px|link=Std_New]] [[Std_New|Std New]]}} button to create a new document.
# Activate the [[Image:Workbench_Part.svg|24px|link=Part_Workbench]] [[Part_Workbench|Part Workbench]].
# Create a Cube.
# Change its '''Dimensions''' to the following:
## Length: 8.000 m.
## Width: 1.000 m.
## Height:  1.000 m.
  1. Создайте новый документ (нажатием на кнопку ).
  2. Активировать верстак Part.
  3. Создайте Куб.
  4. Измените его Размеры на следующие:
    1. Length: 8.000 м.
    2. Width: 1.000 м.
    3. Height: 1.000 м.