Jump to content

Translations:Draft BezCurve/19/en

From FreeCAD Documentation
Revision as of 12:56, 8 January 2019 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The segment endpoints can be constrained such that adjacent control points are tangent or symmetric to the segments at the endpoint. First, start editing the curve, then pick one of the tools and then pick a point. Click again on the tool to deactivate it, so you can move the point.

  • sharp remove constraints on the points so the curve can have sharp corners.
  • tangent force adjacent control points to be tangent.
  • symmetric force adjacent control points to be tangent and equidistant.