Jump to content

Editing Translations:Draft BSpline/5/pl

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Draft BSpline)
* To manually enter coordinates enter the X, Y and Z component, and press {{KEY|Enter}} after each. Or you can press the {{Button|[[Image:Draft_AddPoint.svg|16px]] Enter Point}} button when you have the desired values. It is advisable to move the pointer out of the [[3D_View|3D View]] before entering coordinates.
* Press {{KEY|R}} or click the {{MenuCommand|Relative}} checkbox to toggle relative mode. If relative mode is on, coordinates are relative to the last point, if available, else they are relative to the coordinate system origin.
* Press {{KEY|G}} or click the {{MenuCommand|Global}} checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the [[Draft_SelectPlane|working plane]] coordinate system.
* Press {{KEY|F}} or click the {{MenuCommand|Filled}}{{VersionNoteMinus|1.0}} or {{MenuCommand|Make face}}{{VersionNote|1.1}} checkbox to toggle make face mode. If make face mode is on, the created spline will have {{PropertyData|Make Face}} set to {{TRUE}} and have a filled face, provided it is closed and does not self-intersect. A self-intersecting spline with a face will not display properly, for such a spline {{PropertyData|Make Face}} must be set to {{FALSE}}.
* Press {{KEY|N}} or click the {{MenuCommand|Continue}} checkbox to toggle continue mode. If continue mode is on, the command will restart after using {{Button|[[Image:Draft_FinishLine.svg|16px]] Finish}} or {{Button|[[Image:Draft_CloseLine.svg|16px]] Close}}, or after creating a closed spline by snapping to the first point of the spline, allowing you to continue creating splines.
* Press {{KEY|/}} or the {{Button|[[Image:Draft_UndoLine.svg|16px]] Undo}} button to undo the last point.
* Press {{KEY|A}} or the {{Button|[[Image:Draft_FinishLine.svg|16px]] Finish}} button to finish the command and leave the spline open.
* Press {{KEY|O}} or the {{Button|[[Image:Draft_CloseLine.svg|16px]] Close}} button to finish the command and close the spline. A closed spline can also be created by snapping to the first point of the spline.
* Press {{KEY|W}} or the {{Button|[[Image:Draft Wipe.svg|16px]] Wipe}} button to delete the curve segments already placed, but keep working from the last point.
* Press {{KEY|U}} or the {{Button|[[Image:Draft SelectPlane.svg|16px]] [[Draft_SelectPlane|Set Working Plane]]}} button to adjust the current working plane in the orientation defined by the last and the previous point.
* Press {{KEY|S}} to switch [[Draft_Snap|Draft snapping]] on or off.
* Press {{KEY|Esc}} or the {{Button|Close}} button to finish the command.
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

Please note that all contributions to FreeCAD Documentation are considered to be released under the Creative Commons Attribution (see FreeCAD:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

Formatting help

Cancel Editing help (opens in new window)