Editing Translations:Arch CutPlane/5/fr

# If the cutting plane is to be derived from a straight edge ({{Version|1.0}}) optionally align the [[Draft_SelectPlane|working plane]]:
#* The selected edge cannot be parallel to the normal of the working plane.
#* The generated cutting face will be perpendicular to the working plane.
# Select the object to be cut.
# Do one of the following:
#* Select an object with a single planar face. {{Version|1.0}}
#* Select a planar face in the [[3D_View|3D View]].
#* Select an object with a single straight edge. {{Version|1.0}}
#* Select a straight edge in the [[3D_View|3D View]]. {{Version|1.0}}
# There are several ways to invoke the command:
#* Press the {{Button|[[Image:Arch_CutPlane.svg|16px]] [[Arch_CutPlane|Cut With Plane]]}} button.
#* Select the {{MenuCommand|Modify → [[Image:Arch_CutPlane.svg|16px]] Cut With Plane}} option from the menu.
# Choose {{MenuCommand|Behind}} or {{MenuCommand|Front}} to indicate on which side of the cutting face material should be removed.
# Press the {{Button|OK}} button.