Surface Workbench/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "Scopul atelierului de lucru de suprafață este de a crea fațete cu forme care nu sunt disponibile cu uneltele standard din celelalte ateliere. Kernelul Open Cascade CAD ofer...")
(Created page with "200px Atelierul de suprafețe generază de obicei suprafețe B-splines raționale non uniforme (NURB). Utilizatorul final nu are nevoie să cunoască apa...")
Line 17: Line 17:


[[File:Toy_Duck.png|200px]]
[[File:Toy_Duck.png|200px]]
Atelierul de suprafețe generază de obicei suprafețe B-splines raționale non uniforme (NURB). Utilizatorul final nu are nevoie să cunoască aparatul matematic atașat noțiunii pentru a utiliza instrumentul acesta (este corect?). Este de ajuns să aibă o muchie închisă pentru o fațetă, pentru a crea o suprafață. Opțiunile sunt disponibile pentru modificări ulterioarea a formei sale.
The surface workbench generates usually nurb surfaces. The uses does not need to know much about nurbs(correct?). It is sufficient to have a closed border for a face, in order to create the surface. Options are available to further modify its shape.


The Surface workbench integrates with other workbenches of FreeCAD. The above example was created from [[Sketcher Workbench| sketches]] placed on [[PartDesign Plane| datum planes]] in the [[PartDesign_Workbench| PartDesign workbench]]. The design can be fully parametric, when all datum planes and sketches are defined accordingly.
The Surface workbench integrates with other workbenches of FreeCAD. The above example was created from [[Sketcher Workbench| sketches]] placed on [[PartDesign Plane| datum planes]] in the [[PartDesign_Workbench| PartDesign workbench]]. The design can be fully parametric, when all datum planes and sketches are defined accordingly.

Revision as of 17:16, 2 March 2019

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

AtelierulSurfaceoferă instrumente pentru crearea și modificarea suprafețelor. Are o funcționalitate foarte asemănătoare cu Part Shape builder Face from edges, dar este parametrică și oferă opțiuni suplimentare. Funcționalile sale sunt:

  • Creați suprafețe de la margini
  • Aliniați curbura de la fațetele vecine
  • Constrângeți suprafețele la curbe sau vârfuri suplimentare.
  • Extindeți fațetele (trebuie să aflați cum!)
  • O plasă poate fi utilizată ca șablon pentru a crea curbe spline pe suprafața sa.

introduced in version 0.17

Introducere

Scopul atelierului de lucru de suprafață este de a crea fațete cu forme care nu sunt disponibile cu uneltele standard din celelalte ateliere. Kernelul Open Cascade CAD oferă ca exemplu un colț rotunjit al unei casete dreptunghiulare cu diferite raze la marginile sale. Un alt exemplu este prezentat aici. Este o formă de jucărie din plastic, creată cu atelierul de lucru de suprafață.

Atelierul de suprafețe generază de obicei suprafețe B-splines raționale non uniforme (NURB). Utilizatorul final nu are nevoie să cunoască aparatul matematic atașat noțiunii pentru a utiliza instrumentul acesta (este corect?). Este de ajuns să aibă o muchie închisă pentru o fațetă, pentru a crea o suprafață. Opțiunile sunt disponibile pentru modificări ulterioarea a formei sale.

The Surface workbench integrates with other workbenches of FreeCAD. The above example was created from sketches placed on datum planes in the PartDesign workbench. The design can be fully parametric, when all datum planes and sketches are defined accordingly.

The current state of FreeCAD (v0.17) does not allow to place the surfaces into a body of the PartDesign workbench. But the surfaces can be placed inside of a Part together with the body which holds all datum planes and sketches. The non parametric Part Shape builder must still be used in order to create a shell and a regular solid out of the set of surfaces.

Surface Tools

  • Filling...: fills a series of boundary curves with a surface. The surface can be modified by adding constraint curves and vertexes. The surface changes its shape so that the surface goes through the added constraint elements.
  • Fill boundary curves: creates a surface from two, three or four boundary edges. Three different filling modes are available: Stretch, Coons, Curved.

Additional Menu Tools

These tools are only found in the Surface menu.

  • Curve on mesh...: A selected mesh from the mesh workbench can serve as a template in order to create manually spline curves on it.
  • Extend face: Extrapolate the surface at the boundaries with its local u-parameter and v-parameter.

How to use

Limitations

The used surface code from the CAD-kernel OCCT is very fragile and can not handle wrong input properly. This can cause FreeCAD to crash. The following situations cause problems and may crash FreeCAD:

  • adding additional edges or wires as boundary to a surface, that would make up several faces. Add those edges only to Unbound Edges.
  • Using of boundary edges, that fails do build a closed boundary at parametric changes of the document.
Start_Workbench
TechDraw_Module