Jump to content

Команда "Поворотный просмотр..."

From FreeCAD Documentation
Revision as of 08:11, 29 September 2025 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Поворотный просмотр

Расположение в меню
Инструменты → Поворотный просмотр...
Верстаки
Все
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Описание

Команда Поворотный просмотр вращает камеру в 3D виде.

Диалоговое окно "Повторный просмотр"

Применение

  1. Select the Tools → View Turntable option from the menu.
  2. The View Turntable dialog box opens.
  3. Move the Angle slider to tilt the camera's virtual turn table.
  4. Move the Speed slider to adjust the rotation speed of the camera.
  5. Check the Fullscreen checkbox to switch the 3D View to fullscreen mode.
  6. The Enable timer option is not supported at this time.
  7. Press the Play button. The button will stay pushed in and its text will change to Stop.
  8. In fullscreen mode the dialog will disappear after ca. 5 seconds. It will reappear if the mouse is moved over the 3D View.
  9. Press the Stop button to stop the camera rotation.
  10. Optionally change settings and restart.
  11. Press the Close button to close the dialog box.

Примечания

  • Более подробную информацию про полно экранный режим, смотрите в описании команды Std ViewFullscreen.