Sketcher CreateArcOfHyperbola/zh-cn
|
|
| Menu location |
|---|
| Sketch → Geometries → Hyperbolic Arc |
| Workbenches |
| Sketcher |
| Default shortcut |
| G H |
| Introduced in version |
| 0.17 |
| See also |
| Sketcher CreateArcOfParabola |
Description
The Sketcher CreateArcOfHyperbola tool creates a hyperbolic arc.
Arc of hyperbola (white) with internal geometry (dark yellow)
Usage
See also: Drawing aids.
Pos-OVP = Positional On-View-Parameters.
Dim-OVP = Dimensional On-View-Parameters.
introduced in 26.3: OVP support added.
- There are several ways to invoke the tool:
- Press the Hyperbolic Arc button.
- Select the Sketch → Geometries → Hyperbolic Arc option from the menu.
- Use the keyboard shortcut: G then H.
- The cursor changes to a cross with the tool icon.
- Pick the center of the major radius of the arc (labelled 1 in the image above). Or with Pos-OVP: enter its X- and/or Y-coordinate.
- Pick the vertex of the arc (labelled 2 in the image above), this also defines its major radius. Or with Dim-OVP: enter this radius and/or the angle of the axis of the arc. The angle is relative to the X-axis of the sketch.
- Pick the start point of the arc (labelled 3 or 4 in the image above), this also defines its minor radius. Or with Dim-OVP: enter this radius and/or the start parameter of the arc. The parameter is relative to the axis of the arc. No constraint is created for this parameter.
- Pick the endpoint of the arc (labelled 3 or 4 in the image above). Or with Dim-OVP: enter the end parameter of the arc. The parameter is relative to the start of the arc. No constraint is created for this parameter.
- The hyperbolic arc is created, including a set of internal geometry, and applicable Pos-OVP and Dim-OVP based constraints are added.
- If the tool runs in continue mode:
- Optionally keep creating arcs.
- To finish, right-click or press Esc, or start another geometry or constraint creation tool.
Notes
- Elements of the internal geometry can be deleted. They can be recreated at any time with Sketcher RestoreInternalAlignmentGeometry.
Sketcher
- General: New Sketch, Edit Sketch, Attach Sketch, Reorient Sketch, Validate Sketch, Merge Sketches, Mirror Sketch, Leave Sketch, Align View to Sketch, Toggle Section View, Cancel Editing, Stop Operation, Grid, Snap, Rendering Order
- Geometries: Point, Polyline, Line, Arc From Center, Arc From 3 Points, Elliptical Arc, Hyperbolic Arc, Parabolic Arc, Circle From Center, Circle From 3 Points, Ellipse From Center, Ellipse From 3 Points, Rectangle, Centered Rectangle, Rounded Rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Polygon, Slot, Arc Slot, B-Spline, Periodic B-Spline, B-Spline From Knots, Periodic B-Spline From Knots, Text, Toggle Construction Geometry
- Constraints:
- Dimensional Constraints: Dimension, Horizontal Dimension, Vertical Dimension, Distance Dimension, Radius/Diameter Dimension, Radius Dimension, Diameter Dimension, Angle Dimension, Lock Position
- Geometric Constraints: Coincident Constraint (Unified), Coincident Constraint, Point-On-Object Constraint, Horizontal/Vertical Constraint, Horizontal Constraint, Vertical Constraint, Parallel Constraint, Perpendicular Constraint, Tangent/Collinear Constraint, Equal Constraint, Symmetric Constraint, Block Constraint, Group Constraint, Refraction Constraint
- Constraint Tools: Toggle Driving/Reference Constraints, Toggle Constraints
- Sketcher Tools: Fillet, Chamfer, Trim Edge, Split Edge, Extend Edge, External Projection, External Intersection, Carbon Copy, Select Origin, Select Horizontal Axis, Select Vertical Axis, Move/Array Transform, Rotate/Polar Transform, Scale, Offset, Mirror, Remove Axes Alignment, Delete All Geometry, Delete All Constraints, Copy Elements, Cut Elements, Paste Elements
- B-Spline Tools: Geometry to B-Spline, Increase B-Spline Degree, Decrease B-Spline Degree, Increase Knot Multiplicity, Decrease Knot Multiplicity, Insert Knot, Join Curves
- Visual Helpers: Select Under-Constrained Elements, Select Associated Constraints, Select Associated Geometry, Select Redundant Constraints, Select Conflicting Constraints, Toggle Circular Helper for Arcs, Toggle B-Spline Degree, Toggle B-Spline Control Polygon, Toggle B-Spline Curvature Comb, Toggle B-Spline Knot Multiplicity, Toggle B-Spline Control Point Weight, Toggle Internal Geometry, Switch Virtual Space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub