SheetMetal AddRelief

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

SheetMetal AddRelief

Menu location
SheetMetal → Make Relief
Workbenches
SheetMetal
Default shortcut
S R
Introduced in version
-
See also
SheetMetal AddJunction, SheetMetal AddBend

Description edit

The   SheetMetal AddRelief command creates corner reliefs, cutouts, at the points where three sections (base plate/walls/flanges) of a sheet metal object meet. Without these reliefs the object will not be unfoldable.

This command is the first of three steps to convert a shell object made with the Part Workbench or PartDesign Workbench into an unfoldable sheet metal object:

  1. SheetMetal AddRelief
  2. SheetMetal AddJunction
  3. SheetMetal AddBend

             

Make Relief - cut off corners

Usage edit

  1. Select one or more corner vertex(es).
  2. There are several ways to invoke the command:
    • Press the   Make Relief button.
    • Select the SheetMetal →   Make Relief option from the menu.
    • Right-click in the Tree View or the 3D View and select the Sheet Metal →   Make Relief option from the context menu.
    • Use the keyboard shortcut: S then R.
  3. The Corner relief on solid parameters Task Panel opens (introduced in version 0.5.00).
  4. Optionally press the Select button to add more vertices.
    • Press the Preview button to finish the selection and display the changes.
  5. Optionally adjust the parameters in the Task Panel.
  6. Press the OK button to finish the command and close the Task Panel.
  7. A CornerRelief object will be created consisting of one new corner relief at each selected vertex.
  8. Optionally adjust the parameters in the Property View.

     

Notes edit

The commands   SheetMetal AddRelief,   SheetMetal AddJunction, and   SheetMetal AddBend work best with hollow cuboids i.e. shell objects with a constant thickness and only 90° angles between faces.

Shell objects can be created with commands from the   Part Workbench or the   PartDesign Workbench.

To create a hollow cuboid with the Part Workbench:

  1. Create a solid using either:
  2. Use   Part Thickness to create a shell object from the solid (Typically with the thickness value of the sheet metal).

To create a hollow cuboid with the PartDesign Workbench:

  1. Create a solid using either:
  2. Use   PartDesign Thickness to create a shell object from the solid (Typically with the thickness value of the sheet metal).

Properties edit

See also: Property View.

A SheetMetal Relief object is derived from a Part Feature object or, if it is inside a PartDesign Body, from a PartDesign Feature object, and inherits all its properties. It also has the following additional properties:

Data edit

Parameters

  • Database Object (LinkSub): "Base Object". Links to the corner vertexes defining relief positions.
  • Datarelief (Length): "Relief Size". Default: 2,00 mm.