Robot tutorial

From FreeCAD Documentation
Revision as of 07:20, 3 May 2016 by R-Frank (talk | contribs)
Tutorial
Topic
Robot Workbench
Level
Beginner
Time to complete
Authors
FreeCAD version
0.14.3700
Example files
See also
None

This tutorial is here to teach you how to use the Robot Workbench to simulate a robot cell set-up.

Before you begin

This tutorial is written for FreeCAD Version 0.14.3700 or higher. So if you don't have FreeCAD on your computer go to the Download page and do the installation.

This tutorial targeting on the use of industrial robots and not mobile or service robots (see here).