Plot Basic tutorial/pl: Difference between revisions
(Created page with "Aby utworzyć nowy dokument działki wystarczy uruchomić następujące komendy:") |
(Created page with "Spowoduje to utworzenie nowej zakładki w głównym oknie o nazwie '''TrigonometricTest'''. Nowo utworzony dokument posiada już zestaw osi. Każdy dokument wykresu posiada co...") |
||
Line 39: | Line 39: | ||
}} |
}} |
||
Spowoduje to utworzenie nowej zakładki w głównym oknie o nazwie '''TrigonometricTest'''. Nowo utworzony dokument posiada już zestaw osi. Każdy dokument wykresu posiada co najmniej jeden zestaw osi, które mogą być usunięte bez użycia pełnej kontroli biblioteki matplotlib. |
|||
===Drawing functions=== |
===Drawing functions=== |
Revision as of 09:55, 5 September 2021
Ćwiczenie |
Temat |
---|
Poradnik: Podstawy środowiska pracy Wykres |
Poziom trudności |
Początkujący |
Czas wykonania |
nie określono |
Autorzy |
- |
Wersja FreeCAD |
- |
Pliki z przykładami |
brak |
Zobacz również |
- |
W tym poradniku dowiemy się, jak wykonać podstawowy wykres przy użyciu środowiska pracy Wykres i konsoli Python.
Na poprzednim obrazku możesz zobaczyć rezultat, jaki w przybliżeniu uzyskamy. Po tym poradniku nauczysz się:
- Jak utworzyć wykres w konsoli Python.
- Jak wykreślić kilka danych w konsoli Python.
- Jak wyświetlić linie siatki.
- Jak wyświetlić legendę.
- Jak edytować etykiety serii, wprowadzając tekst w LaTeX.
- Jak edytować etykiety osi, wprowadzając tekst w edytorze LaTeX.
- Jak edytować style serii.
- Jak zapisać swój wykres.
Wykreślanie danych
Aby wykreślić dane nie musisz tworzyć nowego dokumentu FreeCAD, wystarczy, że uruchomisz konsolę Pythona i zaczniesz wysyłać komendy, lub użyjesz makrodefinicji.
Tworzenie dokumentu wykresu=
Wykresy są specjalnymi dokumentami, które można utworzyć ręcznie w celu późniejszego dodania danych, lub pozwolić, aby moduł utworzył je automatycznie w momencie rozpoczęcia wykreślania danych. Tworzenie własnych dokumentów wykresów ma 2 zalety:
- Możesz ustawić etykietę okna dokumentu.
- Możesz łatwo kontrolować, na którym dokumencie wykreślać dane.
Aby utworzyć nowy dokument działki wystarczy uruchomić następujące komendy:
import Plot
Plot.figure("TrigonometricTest")
Spowoduje to utworzenie nowej zakładki w głównym oknie o nazwie TrigonometricTest. Nowo utworzony dokument posiada już zestaw osi. Każdy dokument wykresu posiada co najmniej jeden zestaw osi, które mogą być usunięte bez użycia pełnej kontroli biblioteki matplotlib.
Drawing functions
You can start working here due to plot command will start a new document, but all plot commands that you execute will append series to created plot until you don't create a new document, so usually is better options control the opened plot documents. First thing that we need to do is create the data for sine and cosine functions that we want to plot:
import math
t = range(0,101)
t = [tt/100.0 for tt in t]
s = [math.sin(2.0*math.pi*tt) for tt in t]
c = [math.cos(2.0*math.pi*tt) for tt in t]
That will create 3 arrays of data (with 101 points):
- t = Time in seconds.
- s = Sine function.
- c = Cosine function.
In order to plot both function we only need to launch next commands:
Plot.plot(t,s)
Plot.plot(t,c)
That will plot our functions. plot command allows the series label as argument, but since we will edit it later using Plot module tools we don't pass this data yet.
Configuring plot
Showing grid and legend
Change FreeCAD workbench to Plot module in View/Workbench menu. When module has been loaded use grid tool in order to show it.
You can repeat the action in order to hide it. Also you can show the legend with the tool provided.
As you can see, legend is empty because we have not set any series label yet. In Plot module series without label are not represented at legend, in order to allow you to draw auxiliary lines.
Setting series labels
With the series tool you can edit some series parameters.
First for all select the line that you want to edit, for example we will start with the first one. Uncheck No label and set this label:
$y = \sin \left( 2 \pi t \right)$
Since matplotlib supports LaTeX you can set all the labels or titles that you want using it. Set the following label to second serie:
$y = \cos \left( 2 \pi t \right)$
Setting series style
Series allows you to set a lot of series properties. Try to set the properties shown at the example image, changing series colors and drawing style of the second one.
Setting axes labels
With the labels tool you can set labels associated to all created axes.
Set this data:
- Title = Trigonometric functions example
- X Label = $t$
- Y Label = $y = \mathrm{f} \left( t \right)$
Also change the size of all of them to 20.
Saving plot
With saving plot tool you can save your plot as image file in several formats.
First for all select the path of the output file. You can use file selection dialog using the button at right of the path edition line.
You can set the output image size in inches, for example we can set 11.7x8.3 that is a DIN A4 paper size. DPI (Dots per inch) will control the image resolution, for example using 100 dpi you will get an image of 1170x830 pixels. Template:Tutorials navi/pl
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework