Rampa de entrada

From FreeCAD Documentation
Revision as of 13:04, 8 May 2023 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Other languages:

Path DressupRampEntry

Menu location
Path → Path Dressup → RampEntry Dressup
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also
Path DressupTag, Path DressupDogbone, Path DressupDragKnife

Description

The tool DressupRampEntry dresses up an existing path to add a ramp entry.

Usage

  1. Select a contour or profile path objects
  2. click the RampEntry Dress-up menu item

Properties

  • Ramp Feed Rate : Can either be the current vertical or horizontal feed rate or some other custom value
  • Angle : Angle of the ramp against the vertical axis. A smaller value makes the ramp steeper.
  • Method : Used to select different modes of ramping:
    • RampMethod1: goes down at the ramp angle and the moves horizontal to the target point
    • RampMethod2: goes horizontal first and then down at the ramp angle to the target point
    • RampMethod3: goes down in a zigzag way
    • Helix: goes down spiraling
  • Dressup Start Depth : The distance above the target level where ramping starts
  • Use Start Depth : Indicates that the ramping does not start above the stock level. If it is not set to true the first ramp can be steeper than expected.

From left to right: Ramp method 1, 2 and 3

Ramp method Helix