Part Revolve: Difference between revisions

From FreeCAD Documentation
("Notes" from H3 to H2.)
(Combined the two almost identical notes.)
Line 21: Line 21:


<!--T:2-->
<!--T:2-->
Revolves the selected object around a given axis. The following shape types are allowed, and lead to the listed output shapes ([[#Notes|See Notes for exceptions]]):
Revolves the selected object around a given axis. The following shape types are allowed, and lead to the listed output shapes:


<!--T:3-->
<!--T:3-->
Line 60: Line 60:


<!--T:8-->
<!--T:8-->
* If the object to revolve intersects with an axis that is used for rotation, the operation may fail. For example a line (or circle) that intersects the x-axis cannot be revolved around the x-axis.
* If the object to revolve intersects the rotation axis the operation will fail in most cases.
* If Revolve is performed using an axis that intersects the face to rotate, and you want to create a solid, the result might be invalid. This can happen for various reasons, self-intersection, direction, etc.





Revision as of 11:51, 12 December 2021

Part Revolve

Menu location
Part → Revolve
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
None

Description

Revolves the selected object around a given axis. The following shape types are allowed, and lead to the listed output shapes:

Input shape Output shape
Vertex Edge
Edge Face
Wire Shell
Face Solid
Shell Compound solid (Compsolid)

A Sketch can be used as well. Solids or compound solids are not allowed as input shapes. Normal compounds are currently not allowed either.

The Angle argument specifies how far the object is to be turned. The coordinates move the origin of the axis of revolving, relative to the origin of the coordinate system.

If you select a user defined axis, the numbers define the direction of the revolving axis with respect to the coordinate system: If the Z coordinate is 0 and the Y and X coordinate are non-zero, then the axis will lie in the X-Y-plane. Its angle is such that its tangent is the ratio of the given X and Y coordinates.

Notes

  • If the object to revolve intersects the rotation axis the operation will fail in most cases.