Part Mirror/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Użycie==")
Line 30: Line 30:
{{clear}}
{{clear}}


==Usage==
<span id="Usage"></span>
==Użycie==


[[Image:PARTMirrorDialogv11.png]]
[[Image:PARTMirrorDialogv11.png]]

Revision as of 14:25, 24 June 2023

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Część: Odbicie lustrzane

Lokalizacja w menu
Część → Odbicie lustrzane ...
Środowisko pracy
Część
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
brak

Opis

Odbicie lustrzane tworzy nowy obiekt (obraz), który jest odbiciem oryginalnego obiektu (źródła). Obiekt obrazu jest tworzony za płaszczyzną lustrzaną. Płaszczyzna lustrzana może być płaszczyzną standardową (XY, YZ lub XZ) lub dowolną płaszczyzną równoległą do płaszczyzny standardowej.

Dla przykładu:

Wcześniej
Po (odbicie lustrzane przez płaszczyznę YZ)

Użycie

  1. Select the source object from the Mirroring Panel list.
  2. Select a standard Mirror plane from the dropdown menu.
  3. Press OK to create the image object.

Options

The Base point boxes can be used to move the mirror plane parallel to the selected standard mirror plane. Only one of the X, Y, or Z boxes is effective for a given standard plane.

Standard Plane Base Point Box Effect
XY Z Move mirror plane along Z axis.
XY X, Y No effect.
XZ Y Move mirror plane along Y axis.
XZ X, Z No effect.
YZ X Move mirror plane along X axis.
YZ Y, Z No effect.

Notes

  • App Link objects linked to the appropriate object types and App Part containers with the appropriate visible objects inside can also be used as source objects. introduced in version 0.20
  • Arbitrary mirror planes (ie not parallel to a standard plane) are not supported.