Part Fuse/de: Difference between revisions
(Created page with "=== Unterstützte Eingaben ===") |
(Created page with "Eingabeobjekte müssen OpenCascade-Formen sein. Beispiele: Mit den Part-, PartDesign- und Sketch-Arbeitsbereichen erstellte Komponenten. Keine Netze (außer wenn sie zu Formen...") |
||
Line 21: | Line 21: | ||
=== Unterstützte Eingaben === |
=== Unterstützte Eingaben === |
||
Eingabeobjekte müssen OpenCascade-Formen sein. Beispiele: Mit den Part-, PartDesign- und Sketch-Arbeitsbereichen erstellte Komponenten. Keine Netze (außer wenn sie zu Formen konvertiert wurden) - für Netze gibt es bestimmte Boolesche Werkzeuge im MeshDesing-Arbeitsbereich. |
|||
Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench. |
|||
* Solid + Solid: the result is a solid that occupies all the volume covered by the inputs |
* Solid + Solid: the result is a solid that occupies all the volume covered by the inputs |
Revision as of 21:47, 7 January 2019
Part Vereinigung |
Menüeintrag |
---|
Part → Bool'sche Operation... → Vereinigung |
Arbeitsbereich |
Part |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Part Ausschneiden, Part Common |
Beschreibung
Vereint (verschmilzt) ausgewählte Part Objekte zu einem. Diese Operation ist voll parametrisch und die Komponenten können geändert und das Ergebnis erneut berechnet werden.
Dieser Befehl erlaubt die schnelle Ausführung diese Bool'schen Operation.
Anwendung
Unterstützte Eingaben
Eingabeobjekte müssen OpenCascade-Formen sein. Beispiele: Mit den Part-, PartDesign- und Sketch-Arbeitsbereichen erstellte Komponenten. Keine Netze (außer wenn sie zu Formen konvertiert wurden) - für Netze gibt es bestimmte Boolesche Werkzeuge im MeshDesing-Arbeitsbereich.
- Solid + Solid: the result is a solid that occupies all the volume covered by the inputs
- Shell + Shell, Shell + Face, Face + Face: the result is a shell. Where faces intersect, they are split. Shells can be non-manifold. After fusion, faces can be united by Refining the result.
- Wire + Wire, Edge + Wire, Edge + Edge: the result is a wire. Edges are split where they intersect.
Compounds are supported; however, it is assumed that shapes packed into a compound do not touch or intersect. If they actually do, Fusion will likely fail, or produce an incorrect result.
Options
Items can be added and removed from the fusion, by dragging them in or out of the fusion feature in the tree view with the mouse. A manual recompute (press F5 key or click on the recompute icon) is required to see the results.
After this operation it may be necessary to clean the shape with RefineShape.