PartDesign tutorial/it: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 35: Line 35:
[[Image:PartDesign_revolution_exercise.png|480px]]
[[Image:PartDesign_revolution_exercise.png|480px]]


# Creare uno schizzo basato sull'immagine predente
# Create a sketch based on the image above
# Select [[Image:PartDesign_Revolution.png|32px]] [[PartDesign_Revolution|Revolution]]
# Selezionare [[Image:PartDesign_Revolution.png|32px]] [[PartDesign_Revolution/it|Rivoluzione]]
# Set the "Axis" to the "Horizontal Sketch Axis"
# Impostare "Axis" su "Asse orizzontale dello schizzo"
# Set the angle to 360°
# Impostare l'angolo a 360°


==== Funzioni sottrattive ====
==== Funzioni sottrattive ====

Revision as of 21:54, 13 March 2017

Tutorial
Argomento
Schizzo
Livello di difficoltà
Base
Tempo di esecuzione
15 minuti
Autori
Drei
Versione di FreeCAD
0.16 o superiore
Files di esempio
Vedere anche
Nessuno

Introduzione

Questo tutorial ha lo scopo di introdurre il lettore al flusso di lavoro di base dell'ambiente PartDesign. Il lettore vedrà come creare oggetti 3D sulla base di schizzi, eseguire operazioni di sottrazione e come replicare caratteristiche specifiche in una schiera.

Requisiti

Procedimento

Creare la geometria 3D

Lo scopo dell'ambiente PartDesign è quello di consentire all'utente di creare nello spazio 3D la geometria necessaria. Pertanto, esso è dotato degli strumenti adatti ad usare gli schizzi e a convertirli in oggetti 3D.

Per raggiungere questo obiettivo ci sono due funzioni fondamentali : Prisma e Rivoluzione. Assieme alle loro controparti sottrattive ( Cavità e Gola) esse costituiscono la maggior parte delle azioni comuni utilizzate da questo ambiente.

  1. Passare nell'ambiente PartDesign
  2. Selezionare lo schizzo creato nel tutorial di Schizzo
  3. Selezionare Pad
  4. Impostare la distanza 5 mm
  5. Selezionare Ok

Un altro strumento per creare la geometria 3D è Rivoluzione.

  1. Creare uno schizzo basato sull'immagine predente
  2. Selezionare Rivoluzione
  3. Impostare "Axis" su "Asse orizzontale dello schizzo"
  4. Impostare l'angolo a 360°

Funzioni sottrattive

Iniziare creando un disegno con la forma da sottrarre.

  1. Select the top flat face of the "Revolution"
  2. Select New sketch
  3. Select External Geometry
  4. Approach the edge of the pad. An arc should be highlighted
  5. Select the arc. An arc of a different color should appear in the sketch
  6. Create a hexagon centered on the same point as the arc and set the radius of the reference circle to 5 mm
External Geometry

When a 3D element has been created it is possible to create references to it within a sketch.


  1. Select External Geometry.
  2. Approach the element that you wish to reference, the edge of a Pad for example.
  3. Click on it
  4. New elements of a different color should appear on the sketch in the location of the feature you wish to reference.


Procedere applicando una funzione Cavità.

  1. Selezionare lo schizzo
  2. Selezionare Cavità
  3. Impostare la lunghezza Attraversa tutto

Pattern Features

Recall the extruded profile that was created at the start of the tutorial.

  1. Select the top face of the object
  2. Create a new Sketch
  3. Create reference geometry linked to the top arm of the figure
  4. Create a circle constrained to the center of the reference arc
  5. Set its radius to 3 mm
  6. Pocket the sketch through all the workpiece

Instead of creating a circle for each hole in the sketch, we will introduce the concept of Pattern Features. These tools operate by replicating a feature in the workpiece that has already been created and that we wish to reproduce in a linear or circular arrangement. We will use a combination of Linear and Polar pattern features simulatneously to obtain the final workpiece.

  1. Select the Pockt feature that we just created in the Tree View
  2. Select MultiTransform

In the Combo View we are now asked to introduce the Transformations that we desire. Notice that in the MultiTransform parameters menu we see that FreeCAD has identified the Pocket as the Original feature and a second box requests us to Right click it to introduce the pattern features.

  1. Right click the box
  2. Select Add Linear Pattern
  3. Set the Direction to Vertical Sketch Axis
  4. Set length to 10 mm
  5. Leave occurrences at 2
  6. Click OK
  7. Right click the box again to add a Polar Pattern. Notice that the 3D view has now added the linear pattern.
  8. Set occurrences to 5
  9. Click OK twice

After completing this task you should have the following result.

If not, re-edit the MultiTransform operation by double clicking on it in the Tree View. Check both pattern features to detect necessary modifications, such as the Axis and if the Direction needs to be reversed.

We are now finished with the basic workflow for the PartDesign Workbench.