PartDesign tutorial/de: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
Line 14: Line 14:
This tutorial will continue working with the sketch that was created [[Sketcher_tutorial|previously]].
This tutorial will continue working with the sketch that was created [[Sketcher_tutorial|previously]].


[[Image:PartDesign_tutorial_result.png|480px]]
[[Image:Sketcher_tutorial_result.png|480px]]


=== Voraussetzungen ===
=== Voraussetzungen ===
Line 24: Line 24:
The purpose of the '''PartDesign Workbench''' is to allow the user to create geometry in 3D space to fulfill a certain need. As such, it is equipped with tools to make use of sketches and convert them to 3D objects.
The purpose of the '''PartDesign Workbench''' is to allow the user to create geometry in 3D space to fulfill a certain need. As such, it is equipped with tools to make use of sketches and convert them to 3D objects.


Es gibt zwei grundlegende Funktionen, um dies zu erreichen: [[PartDesign_Pad/de|Block]] [[Image:PartDesign_Pad.png|24px]] und [[PartDesign_Revolution/de|Rotation]] [[Image:PartDesign_Revolution.png|24px]]. Daneben gibt es noch deren negative Pendants ([[PartDesign_Pocket/de|Tasche]] [[Image:PartDesign_Pocket.png|24px]] und [[PartDesign_Groove/de|Nut]] [[Image:PartDesign_Groove.png|24px]]). Zusammen stellen diese vier Funktionen die wichtigsten Werkzeuge dieses Arbeitsbereichs dar.
There are two basic features to achieve this: [[Image:PartDesign_Pad.png|32px]] [[PartDesign_Pad|Pad]] and [[Image:PartDesign_Revolution.png|32px]] [[PartDesign_Revolution|Revolution]]. Alongside their subtractive counterparts ([[Image:PartDesign_Pocket.png|32px]] [[PartDesign_Pocket|Pocket]] and [[Image:PartDesign_Groove.png|32px]] [[PartDesign_Groove|Groove]]) they make up most of the common actions used by this workbench.


# Wechseln Sie in den Arbeitsbereich '''PartDesign'''.
# Wechseln Sie in den Arbeitsbereich '''PartDesign'''.

Revision as of 17:58, 9 February 2017

Tutorium
Thema
Skizzieren
Niveau
Anfänger
Zeit zum Abschluss
15 Minuten
Autoren
Drei
FreeCAD-Version
0.16 oder neuer
Beispieldateien
Siehe auch
None

Einleitung

Dieses Tutorial soll den Leser in die Grundlagen des Arbeitsbereichs PartDesign einführen.

This tutorial will continue working with the sketch that was created previously.

Voraussetzungen

  • FreeCAD Version 0.16 oder neuer
  • Das Leser hat das Sketcher Tutorial bereits absolviert

Procedure

Creating 3D geometry

The purpose of the PartDesign Workbench is to allow the user to create geometry in 3D space to fulfill a certain need. As such, it is equipped with tools to make use of sketches and convert them to 3D objects.

There are two basic features to achieve this: Pad and Revolution. Alongside their subtractive counterparts ( Pocket and Groove) they make up most of the common actions used by this workbench.

  1. Wechseln Sie in den Arbeitsbereich PartDesign.
  2. Wählen Sie die im Sketcher Tutorial erstellte Skizze aus.
  3. Klicken Sie auf die Schaltfläche Block .
  4. Geben Sie als Länge 5 mm ein.
  5. Klicken Sie auf OK.

Eine andere Möglichkeit zum Erzeugen von 3D-Geometrie ist das Werkzeug Rotation .

  1. Erstellen Sie eine Skizze basierend auf dem oben gezeigten Bild.
  2. Klicken Sie auf Rotation .
  3. Geben Sie beim Winkel 360° ein.

Subtracting Features

We'll begin by creating a sketch with the shape we want to subtract.

  1. Select the top face of the Pad
  2. Select New sketch
  3. Select External Geometry
  4. Approach the edge of the pad. An arc should be highlighted
  5. Select the arc. An arc of a different color should appear in the sketch
  6. Create a circle centered on the same point as the arc and set its radius to 5 mm


Afterwards, we'll proceed to apply a Pocket feature.

  1. Select the sketch
  2. Select Pocket
  3. Set the distance to Through all

Pattern Features

We are now finished with the basic workflow for the Sketcher Module.