Ambiente Part Design

From FreeCAD Documentation
Revision as of 20:02, 4 December 2013 by Renatorivo (talk | contribs) (Created page with "=== Concetti base sul flusso di lavoro ===")

Part Design è l'ambiente per la costruzione di oggetti Parte basati su disegni 2D che mette a disposizione gli strumenti per modellare parti solide complesse e si basa sulla metodologia delle funzioni editabili.

Questo ambiente è strettamente connesso con l'ambiente Sketcher che è l'ambiente per gli schizzi di base.

Concetti base sul flusso di lavoro

The sketch is the building block for creating and editing solid parts. The workflow can be summarized by this: a sketch containing 2D geometry is created first, then a solid creation tool is used on the sketch. At the moment the available tools are:

  • Pad which extrudes a sketch
  • Pocket which creates a pocket on an existing solid
  • Revolve which creates a solid by revolving a sketch along an axis
  • Groove' which creates a groove in an existing solid

More tools are planned in future releases.

A very important concept in the PartDesign workbench is the sketch support. Sketches can be created on standard planes (XY, XZ, YZ and planes parallel to them) or on the face of an existing solid. For this last case, the existing solid becomes the support of the sketch. Several tools will only work with sketches that have a support, for example, Pocket - without a support there would be nothing to remove material from!

After solid geometry has been created it can be modified with chamfers and fillets or transformed, e.g. mirrored or patterned.

The Partdesign workbench is meant to create a single, connected solid. Multiple solids will be possible with the Assembly workbench.

The Tools

The Part Design tools are all located in the Part Design menu that appears when you load the Part Design module.

They include the Sketcher Workbench tools, since the Part Design module is so dependent on them.

The Sketcher Tools

Template:Sketcher Tools

The Part Design Tools

Template:PartDesign Tools

Extras

Template:PartDesign Extras

Feature properties

Template:PartDesign Placement