PartDesign SubtractiveWedge

PartDesign SubtractiveWedge

Menu location
Part Design → Subtractive Primitive → Subtractive Wedge
Workbenches
PartDesign
Default shortcut
None
Introduced in version
0.17
See also
PartDesign AdditiveWedge

Description

The   PartDesign SubtractiveWedge tool inserts a primitive wedge in the active Body. Its shape is combined with the existing solid through a subtraction or (introduced in 26.3) common boolean operation.

 

On the left: active body (A) shown in grey and primitive wedge (B) shown in transparent red; subtraction result on the right.

Usage

  1. There are several ways to invoke the tool:
    • Press the   Subtractive Wedge button. Note: the Subtractive Wedge is part of an icon menu labelled Subtractive Primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Subtractive Wedge in the menu.
    • Select the Part Design → Subtractive Primitive →   Subtractive Wedge option from the menu.
  2. The task panel opens.
  3. Set the parameters.
  4. introduced in 26.3: Optionally change the boolean Operation used to combine the wedge with the base solid:
    • Subtraction (default): the wedge removes its volume from the base solid.
    • Common: the wedge keeps only the volume shared between itself and the base solid, discarding everything else.
  5. Optionally set the Attachment.
  6. Press the OK button to close the task panel and finish the tool.
  7. A Wedge feature appears under the active Body.

Editing

See PartDesign AdditiveCone.

Notes

  • Wedges can be used to create pyramids by setting DataX2min/max and DataZ2min/max each so that min = max.

Properties

A PartDesign SubtractiveWedge object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Attachment

See Part Part2DObject.

Part Design

See PartDesign Pocket.

Wedge

See PartDesign AdditiveWedge.