PartDesign Cilindro Sustractivo

From FreeCAD Documentation
Revision as of 18:06, 30 May 2021 by Stylishcp (talk | contribs)

PartDesign Cilindro Sustractivo

Ubicación en el Menú
Part Design → Crear una primitiva sustractiva → Cilindro Sustractivo
Entornos de trabajo
PartDesign
Atajo de teclado por defecto
Ninguno
Introducido en versión
0.17
Ver también
Ninguno

Descripción

Inserta un Cilindro sustractivo en el Body (cuerpo) activo. Su forma es sustraída del sólido existente.

A la izquierda: Body activo (A) Mostrado en color gris y el Cilindro sustractivo (B) mostrado en color rojo transparente. El resultado se puede apreciar a la derecha.

Uso

  1. Presionar el botón Cilindro Sustractivo . Nota: El Cilindro sustractivo forma parte de un icono de herramientas llamado Crear una primitiva sustractiva. Tras abrir FreeCAD, la Caja sustractiva es la única mostrada en la barra de herramientas. Para obtener el Cilindro, pinchar en la flecha que indica hacia abajo que está al lado del icono visible y seleccionar Cilindro sustractivo en el menú desplegable.
  2. Seleccionar los parámetros de la primitiva y el Attachment.
  3. Aceptar OK.
  4. Una operación de Cilindro aparece dentro del Body (cuerpo) activo.

Options

It is possible to create skewed prisms by specifying angles in respect to the normal vector of the chosen attachment. introduced in version 0.20

The Cylinder can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DatosAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DatosLabel: label given to the Cylinder object. Change to suit your needs.
  • DatosRadius: the radius value of the cylinder.
  • DatosAngle: angle of rotation of the cross section (360 degrees forms a full cylinder).
  • DatosHeight: the length of the cylinder along its axis.
  • DatosFirst Angle: angle in first direction. introduced in version 0.20
  • DatosSecond Angle: angle in second direction. introduced in version 0.20