PartDesign: Transformări Multiple

From FreeCAD Documentation
Revision as of 10:07, 1 November 2018 by Luc (talk | contribs) (Created page with "==Example== c|center|800px Cel mai mic bosaj a fost modelat mai întâi de trei ori în direcția X și apoi scalat la factorul doi (deci cele trei a...")

PartDesign MultiTransform

Menu location
PartDesign -> MultiTransform
Workbenches
PartDesign, Complete
Default shortcut
None
Introduced in version
-
See also
None

Introducere

'Make a pattern from combinations of transformations' - This tool takes a set of one or more selected features as its input (the 'originals'), and allows to apply several transformations in sequence to them. For example, to produce a flange with a double row of holes, the hole (the 'original') is first patterned in a linear pattern in the X direction, and then patterned eight times in a polar pattern around the Y axis.

Opțiuni

When creating a multitransform feature, the 'multitransform parameters' dialogue offers two different list views.

Select originals

The list view shows the 'originals', the features that are to be patterned. Clicking on any feature will add it to the list.

Select transformations

This list can be filled with a combination of the simple transformations mirrored, linear pattern, polar pattern and scaled. The transformations will be applied one after the other. The context menu offers the following entries:

Edit

Allows editing the parameters of a transformation in the list (double-clicking will have the same effect)

Delete

Removes a transformation from the list

Add transformation

Adds a transformation to the list

Move Up/Down

Allows changing the order of transformations in the list

Limitations

  • A scaled transformation should not be the first in the list
  • The scaled transformation must have the same number of occurrences as the transformation immediately preceding it in the list
  • For further limitations, see the linear pattern feature

Example

c
c

Cel mai mic bosaj a fost modelat mai întâi de trei ori în direcția X și apoi scalat la factorul doi (deci cele trei apariții au factorul de scalare 1,0, 1,5 și 2,0). Apoi a fost aplicat un model polar cu 8 apariții. c | centru | 800px Buzunarul a fost primul oglindit pe planul YZ și apoi modelat cu două modele liniare pentru a da un model dreptunghiular.