Projekt Części: Odbicie lustrzane

From FreeCAD Documentation
Revision as of 07:06, 18 June 2023 by Kaktus (talk | contribs) (Created page with "===Edycja===")

Projekt Części: Odbicie lustrzane

Lokalizacja w menu
Projekt Części → Zastosuj przekształcenie → Odbicie lustrzane
Środowisko pracy
Projekt Części
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Transformacja wielokrotna

Opis

  • Narzędzie Odbicie lustrzane odzwierciedla jedną lub więcej cech.

Element Kieszeń utworzony ze szkicu zawierającego okrąg (A) jest używany do utworzenia elementu odbicia lustrzanego. Pionowa oś szkicu (B) jest używana do zdefiniowania płaszczyzny lustrzanej. Wynik (C) pokazany jest po prawej stronie.

Użycie

Tworzenie

  1. Opcjonalnie wybierz odpowiednią Zawartość.
  2. Opcjonalnie wybierz jedną lub więcej cech.
  3. Istnieje kilka sposobów wywołania narzędzia:
    • Naciśnij przycisk Odbicie lustrzane.
    • Wybierz opcję z menu Projekt Części → Zastosuj przekształcenie → Odbicie lustrzane.
  4. Jeśli nie wybrano aktywnej Zawartości, a w dokumencie istnieją dwie lub więcej Zawartości, otworzy się okno dialogowe Wymagana jest aktywna zawartość z monitem o wybranie jednej z nich. Jeśli istnieje jedna struktura, zostanie ona aktywowana automatycznie.
  5. Jeśli nie wybrano żadnych cech, zostanie otworzony panel zadań Wybierz cechę : należy wybrać jedną lub więcej cech (przytrzymując klawisz Ctrl) z listy i nacisnąć przycisk OK.
  6. Otworzy się Panel zadań Parametry odbicia lustrzanego. Więcej informacji można znaleźć w sekcji Opcje.
  7. Naciśnij przycisk OK, aby zakończyć.

Edycja

  1. Do one of the following:
    • Double-click the Mirrored object in the Tree view.
    • Right-click the Mirrored object in the Tree view and select Edit Mirrored from the context menu.
  2. The Mirrored parameters task panel opens. See Options for more information.
  3. Press the OK button to finish.

Options

  • To add features:
    1. Press the Add feature button.
    2. Select a feature in the Tree view or the 3D view.
    3. Repeat to add more features.
  • To remove features:
    1. Press the Remove feature button.
    2. Do one of the following:
      • Select a feature in the Tree view or the 3D view.
      • Select a feature in the list and press the Del key.
      • Right-click a feature in the list and select Remove from the context menu.
    3. Repeat to remove more features.
  • If there are several features in the pattern, their order can be important. See PartDesign PolarPattern.
  • Specify the mirror Plane:
    • Vertical sketch axis: The Y axis of the sketch (the plane passes through this reference and the Z axis of the sketch, only available for sketch-based features).
    • Horizontal sketch axis: The X axis of the sketch (idem).
    • Construction line #: A separate entry for each construction line in the sketch (idem).
    • Base XY plane: The XY plane of the Body.
    • Base YZ plane: The YZ plane of the Body.
    • Base XZ plane: The XZ plane of the Body.
    • Select reference...: Select a planar face in the 3D view.
  • If the Update view checkbox is checked the view will update in real time.

Limitations

See PartDesign PolarPattern.