PartDesign Шестерня с эвольвентным профилем

From FreeCAD Documentation
Revision as of 07:40, 4 September 2022 by Evgeniy (talk | contribs)

Шестерня с эвольвентным профилем

Системное название
PartDesign_InvoluteGear
Расположение в меню
Part Design → Шестерня с эвольвентным профилем...
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Верстак FCGear

Описание

Инструмент позволяет создать двумерный профиль эвольвентного зубчатого колеса (шестерни). Этот профиль полностью параметрический настраиваемый, и может быть преобразован в твердое тело с помощью выдавливания или инструмента Аддитивная спираль.

For more detailed information see Wikipedia's entries for: Gear and Involute Gear

Применение

Создание профиля

  1. По желанию активируйте подходящее тело (необязательно) .
  2. Выберите пункт меню Part Design → Шестерня с эвольвентным профилем....
  3. Установите параметры эвольвентного зацепления.
  4. Нажмите OK.
  5. Если при создании профиля активного Тело не было выбрано, тогда переместите сформированный профиль в какое-нибудь Тело чтобы в дальнейшем выдавить или вырезать полученный профиль.

Формирование зубчатого колеса из профиля

  1. Select the gear profile in the Tree view.
  2. Press the PartDesign Pad button.
  3. Set the pad's ДанныеLength to the desired face width of the gear.
  4. Click OK

Создание косозубого зубчатого колеса

представлено в версии 0.19

  1. Select the gear profile in the Tree view.
  2. Press the PartDesign AdditiveHelix button.
  3. Choose as Axis the normal of the gear profile, that is Normal sketch axis introduced in version 0.20. (In earlier versions the Base Z axis can be used as long as the profile's plane has not been altered.)
  4. Choose a Height-Turns mode.
  5. Set the ДанныеHeight to the desired face width of the gear.
  6. To set the desired helical angle an Expression for the ДанныеTurns is required.
    1. Click the blue icon at the right of the input field.
    2. Enter the following formula: Height * tan(25°) / (InvoluteGear.NumberOfTeeth * InvoluteGear.Modules * pi), where 25° is an example for the desired helical angle (also known as beta-value) and InvoluteGear is the ДанныеName of the profile.
    3. Click OK to close the formula editor.
  7. Click OK to close the task panel.

Hint: To make the helical angle an accessible parameter, use a dynamic property:

  1. Select the profile.
  2. In the Property editor activate the Show all option in the context menu.
  3. Again in the context menu, select Add Property. Note: this entry is only available when Show all is active.
  4. In the Add Property dialog:
    1. Choose App::PropertyAngle as Type.
    2. Set Gear as Group.
    3. Set HelicalAngle as Name (without a space).
    4. Click OK
  5. Now a new property ДанныеHelical Angle (space added automatically), with an initial value of 0.0°, becomes available.
  6. Assign the desired helical angle to the new property.
  7. In the formula of the ДанныеTurns property of the AdditiveHelix, you can now reference InvoluteGear.HelicalAngle instead of the hard coded value of e.g. 25°; again assuming InvoluteGear is the ДанныеName of the profile.

Свойства

  • ДанныеExternal Gear: Внешнее зацепление - Да или Нет
  • ДанныеHigh Precision: Высокая точность - Да или Нет
  • ДанныеModules: Модуль - Диаметр делительной окружности, деленный на количество зубцов.
  • ДанныеNumber Of Teeth: Задает количество зубьев.
  • ДанныеPressure Angle: Acute angle between the line of action and a normal to the line connecting the gear centers. Default is 20 degrees. (More info)


Ограничения

  • It is currently not possible to adjust the tooth thickness. Tooth and tooth space are distributed equally on the pitch circle. Thus the only way to control backlash is to adjust the center distance in a gear paring.
  • There is currently no undercut in the generated gear profile. That means gears with a low number of teeth can interfere with the teeth of the mating gear. The lower limit depends on the ДанныеPressure Angle and is around 17 teeth for 20° and 32 for 14.5°. Most practical applications tolerate a missing undercut for gears a little smaller than this theoretical limit though.

Материалы для изучения

How to make gears in FreeCAD

Сопутствующая информация