Navigation Cube/ナビゲーションキューブ

From FreeCAD Documentation
Revision as of 09:46, 18 January 2019 by Luc (talk | contribs)

Controlul cubului de navigație sau "cubul de navigație" "este o interfață grafică pentru a reorienta vizualizarea 3D. Implicit, este vizibil și se află în colțul din dreapta sus al afișajului 3D. Dacă vă uitați la vizualizarea 3D standard, aceasta arată după cum urmează:

ナビゲーションキューブは、次の部分で構成されています。

  • Directional Arrows
  • Main Navigation Cube
  • Mini-cube Menu

Hovering the mouse pointer over a feature of the navigational cube turns the feature light blue; clicking will reorient the 3D view as indicated by the feature. (Note: As of this writing, the pointer does not register perfectly with some navigational cube features. If a feature you are trying to select does not turn light blue, move the mouse until you find a spot which causes the feature to turn blue.) In the example below, the 3D view has been rotated by a mouse gesture to a "non-standard" orientation. The pointer is over a corner (indicated by the blue color); clicking will reorient the 3D view to a standard axonometric view with that corner facing you.

Directional Arrows

6つの方向矢印があります。4つの三角矢印、上、下、左、右に1つずつ。 2つの湾曲した矢印。1つは上の矢印の両側にあります。

三角形の矢印をクリックすると、3Dビューが矢印の方向に垂直な線を中心に45度回転します。 湾曲した矢印をクリックして、3Dビューを真っ直ぐな線を中心に回転させます。 <! - 注:回転軸が正しく定義されていません。 それぞれが2つの平面の交点ですが、それらをどのように記述するのか私は理解できません - >

プライマリナビゲーションキューブ

メインナビゲーションキューブ(このセクションでは "nav cube")は、3Dビューの主要部分にある実際のオブジェクトの向きを追跡します。 メイン3Dビューの向きを変える操作は、ナビゲーションキューブの向きも変えます。

The nav cube is essentially a 3D view of a cube with its three main component types (faces, edges, and corners) enhanced so they may be easily clicked with the pointer. Clicking on a particular component will set the 3D view to have that component centered and facing you. The nav cube is somewhat "squashed", as if the feature farthest from you were larger than the feature directly facing you. This allows the features adjacent to the feature facing you to be seen and consequently selected. For example, in a "normal" view of a regular cube, when one face is facing you, you can also see the four edges of that face and the four corners of that face. In the "squashed" nav cube, you can also see features representing each of the adjacent faces, the four edges connecting the corners of the face facing you with the opposite face, and the corners of opposite face. This allows you to select any of the possible standard views except the opposite face and its edges (21 out of 26 possible views):

  • The face facing you (does nothing, since that is the current view)
  • The four edges of the current face
  • The four corners of the current face
  • The four adjacent faces
  • The four edges leading to the opposite face
  • The four corners of the opposite face

Not possible:

  • The opposite face
  • The edges of the opposite face

Note: As of this writing (v 0.18), there are some problems with the nav cube; not all features are currently selectable. In particular, edges are not selectable, nor are the four corners of the immediately facing face.

Selectarea Fațetei

Dacă faceți clic pe o fațetă, orientarea 3D va fi orientată spre fațeta respectivă. Din punctul de vedere al fațetei, sunt disponibile alte puncte de selecție, după cum sa menționat mai sus. Pe fiecare margine exterioară există patru bare "subțiri", reprezentând cele patru fețe adiacente; făcând clic pe ele va fi selectată vizualizarea corespunzătoare fațetei adiacente. Există patru colțuri rotunde care pot fi utilizate pentru a seta vederea axonometrică corespunzătoare. Există, de asemenea, un set interior de muchii și colțuri, care sunt în prezent nefuncționale.

Selecția marginilor

Din păcate, selecția de margine este nefunțională în prezent. Încercarea de a selecta o margine va selecta fațeta care se află în spatele ei. Dacă faceți clic pe o margine, trebuie să centrați marginea astfel încât aceasta să fie îndreptată spre dvs.

Selecția colțului

Dacă faceți clic pe unul dintre colțuri, vi se va oferi o vedere axonometrică din colțul respectiv. După cum s-a menționat mai sus, în momentul în care o fațetă este îndreptată direct spre dvs., colțurile acelei fețe nu pot fi selectate.

Meniul Mini-cube

În colțul din dreapta jos al cubului de navigație este un mic cub. Dacă faceți clic pe acest cub va apărea un meniu pe care îl puteți utiliza pentru a schimba tipul de vizualizare (Ortografic, Perspectivă, Isometric) și pentru a face o "Zoom pentru a se potrivi".

Deplasarea afișajului cubului de navigație

Puteți mutați întreaga structură de control a cubului de navigație într-o altă locație din afișajul 3D, apăsând mouse-ul oriunde în cubul principal de navigare și trasând. De la această scriere (v 0.18), structura nu va începe să se miște până când indicatorul mouse-ului nu sa deplasat peste marginea cubului principal de navigație.

Mouse Model
Document structure