Mouse navigation/ro: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 38: Line 38:




== Manipularea Obiectelor ==
== Manipulating Objects ==
FreeCAD offers [[Manipulator|''manipulators'']] that are handles that can be used to modify an object's appearance, shape, or other parameters.
FreeCAD ofera [[manipulator/ro|manipulatori]] ce pot fi folositi pentru a schimba aparenta sau proprietatile obiectului.




{{Note|''Obsolete''|The [[clipping plane]] is a good example of an object with manipulators. A [[clipping plane]] can be activated with the ''View→Clipping Plane'' menu. After activation the clipping plane object appears and shows seven obvious manipulators as little boxes: One on each end of its three coordinate axes and one on the center of the plane normal axis. There are four more that are not as obvious: The plane itself and the thin part of the three axis objects.
{{Note|''Obsolete''|
;Scaling: To scale the object click with the left mouse button on the box manipulators at the end of the axes and pull them back and forth. Depending on the object the manipulators work independently or synchronously.

;Out of plane shifting: To shift the object along its normal vector, pull the long box on the center of an axis with the left mouse button. For the clipping plane there is only one manipulator along the normal vector.
Un exemplu simplu este [[clipping plane/ro|planul de taiere]] ce poate fi activat folosind meniul ''Vizualizare→Plan de taiere''. Dupa activare obiectul-plan de taiere apare si prezinta sapte manipulatori evidentiati ca si casute mici: cate una pe fiecare axa de coordonate si una in centru. Exista patr care sunt mai putin evidente: planul insusi si partea subtire a celor trei axe de coordonate.
;In plane shifting: To move the center of the clipping plane, click on the plane object and pull it to the desired location.

;Rotation: Clicking on the thin part of the axes puts the manipulator in rotation mode.
;Scalarea: Pentru a scala obiectul click c butonul stang al mouse-ului pe manipulatorii-casute de la capatul axelor si trageti de ei inainte si inapoi. In functie de obiect ei functioneaza independent sau sincron.
}}
;Miscare in afara planului: Pentru a translata obiectul de-a lungul vectorului normal trageti de caseta alungita din centru axelor folosind butonul stanga. Pentru planul de taiere exista un singur manipulator in lungul vectorului normal.
;Translatie in plan: Pentru a muta centrul planului de taiere faceti click pe plan si trageti de el in directia dorita.
;Rotatie: Faceti click pe partea subtire a axelor de coordonate pentru a pune manipulatorul in modul rotatie.


== Suport Hardware ==
== Suport Hardware ==

Revision as of 20:05, 18 April 2014

Modelul mouse-ului in FreeCAD este constituit din comenzi folosite la navigarea spatiului 3D si interactiunea cu obiectele afisate. In versiunea actuala exista trei moduri diferite de navigare. Modul implicit este numit "Navigare CAD" si este foarte simplu si practic, dar FreeCAD are doua stiluri alternative modelate dupa navigarea in Inventor si Blender.

Navigarea

Modul de lucru cu obiecte este comun pentru toate paletele. Urmatoarele actiuni cu mouse-ul pot fi folosite pentru controlul pozitiei si modului de vizualizare, in functie de stilul de navigare selectat.

Exista doua moduri de a schimba stilul de navigare:

  • In dialogul pentru preferinte, sectiunea Afisare, tab-ul Vizualizare 3D;
  • Click-dreapta in spatiu liber in zona de vizualizare 3D, selectand Stil de navigare in meniul contextual.


Navigare CAD (implicita)

Acesta este modul de navigare implicit si permite utilizatorului un control simplu al vizualizarii; nu este nevoie de folosirea tastaturii decat pentru selectie multipla.

Selectare Translatie Zoom Rotire
pentru selectie pentru translatie pentru a mari sau micsora pentru a roti vizualizarea
Apasati butonul stanga al mouse-ului deasupra obiectului de selectat. Apasarea tastei CTRL permite selectarea mai multor obiecte. Apasati butonul din mijloc si miscati mouse-ul pentru a translata vizualizarea. Folositi rotita mouse-ului pentru a mari sau micsora. Apasati mai intai butonul din mijloc al mouse-ului, tineti-l apasat si apasati butonul stanga al mouse-ului si mutati-l in directia dorita. Functioneaza ca o bila ce se roteste in jurul centrului. Daca eliberati butoanele inainte de a inceta miscarea vizualizarea va continua sa se roteascain jurul centrului, daca aceasta caracteristica e activata. Dublu-click folosind butonul mijlociu pe oricare parte a unui obiect seteaza noul centru de rotatie si panorameaza pe acest punct.


Inventor Navigation

In Inventor Navigation, modeled after Open Inventor (not to be confused with Autodesk Inventor), there is no mouse-only selection. In order to select objects, you must hold down the CTRL key. Template:Inventor Navigation


Navigare Tip Blender

In acest mod nu exista translatie doar cu mouse-ul. Pentru a face asta trebuie tinuta apasata tasta SHIFT.

Selectare Translatie Zoom Rotire
pentru a selecta shift+pentru translatie pentru marire sau micsorare pentru rotatie
Apasati butonul stanga al mouse-ului deasupra obiectului pe care doriti sa-l selectati Apasati tasta SHIFT si apasati butonul din mijloc al mouse-ului pentru a muta obiectul. Folositi rotita mouse-ului pentru marire si micsorare. Click si trageti cu butonul din mijloc al mouse-ului.


Touchpad Navigation

In Touchpad Navigation, neither panning, nor zooming, nor rotating the view, are mouse-only (or touchpad-only) operations.

{{{Select_name}}} {{{Pan_name}}} {{{Zoom_name}}} {{{Rotate_view_name}}}
{{{Shift}}}+ {{{PageUp}}}, {{{PageDown}}} {{{Alt}}}+
{{{Select_text}}} {{{Pan_text}}} {{{Zoom_text}}} {{{Rotate_view_text}}}
{{{Ctrl}}}+{{{Shift}}}+ {{{Shift}}}+
{{{Zoom_alt_text}}} {{{Rotate_view_alt_text}}}

Selectarea Obiectelor

Obiectele se selecteaza cu click-stanga in vizualizarea 3D sau selectare in vizualizarea arborescenta.

Exista, de asemenea, si un mecanism de preselectie care evidentiaza obiectele si prezinta informatii despre ele inainte de a fi selectate, doar prin miscarea mouse-ului deasupra lor. Daca nu agreati acest comportament sau calculatorul este incet puteti sa-l suprimati din dialogul pentru preferinte.


Manipulating Objects

FreeCAD offers manipulators that are handles that can be used to modify an object's appearance, shape, or other parameters.


Obsolete

The clipping plane is a good example of an object with manipulators. A clipping plane can be activated with the View→Clipping Plane menu. After activation the clipping plane object appears and shows seven obvious manipulators as little boxes: One on each end of its three coordinate axes and one on the center of the plane normal axis. There are four more that are not as obvious: The plane itself and the thin part of the three axis objects.

Scaling
To scale the object click with the left mouse button on the box manipulators at the end of the axes and pull them back and forth. Depending on the object the manipulators work independently or synchronously.
Out of plane shifting
To shift the object along its normal vector, pull the long box on the center of an axis with the left mouse button. For the clipping plane there is only one manipulator along the normal vector.
In plane shifting
To move the center of the clipping plane, click on the plane object and pull it to the desired location.
Rotation
Clicking on the thin part of the axes puts the manipulator in rotation mode.


Suport Hardware

FreeCAD suporta si un numar de dispozitive 3D.

Mac OS X Issues

Recently we got reports on the forum from Mac users that those mouse button and key combination do not work as expected. Unfortunately, none of the developers owns a Mac, neither do the other regular contributors. We need your help to determine which mouse buttons and key combination work so we can update this wiki.

Getting started/ro
Document structure/ro