GuiCommand model

From FreeCAD Documentation
Revision as of 18:12, 13 February 2022 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
This page shows a model of a recommended GuiCommand page. Under the Selectable block section below you will find the same content easily selectable for pasting in a new page.

Base_ExampleCommandModel

Ubicación en el Menú
Ninguno
Entornos de trabajo
Wb1,Wb2
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Ninguno

Descripción

While the page is under construction, add the Template:UnfinishedDocu template at the top of the page by simply typing: {{UnfinishedDocu}}

In this first paragraph give a short description of what the command does. The description can refer to other workbenches such as the Sketcher Workbench. (Editor note: The image is 24px, not 16px)

Remember to use Template:Version, Template:VersionMinus, Template:VersionPlus and Template:Obsolete when applicable.

For example: The App::Link feature (introduced in version 0.19) allows linking between sub-assemblies etc...

Add an image if possible, and please follow the guidelines in WikiPages#Graphics. Example taken from Part Sweep:

Optional: add a caption below the image to explain what the tool does

Closing and opening translate tags should surround images, and other fixed elements, if they don't need to be translated. The caption should always be translated.

Descripción


image


Utilización

  1. Cómo se utiliza
  2. Cómo se utiliza

Opciones

  • TASK Length:Tareas
{{PropertyTasks|Length}} (Código del título)
  • Opciones
  • Optional. List the command options here. See for example Draft Wire.

Example

Optional.

Notes

  • Optional. Use a bullet list if there are multiple items. You can also mention limitations here.

Propiedades

  • DatosProperties:Propiedades
{{PropertyData|Length}} (Código del título)
  • VistaProperties:Propiedades
 {{PropertyView|Properties}} (Código del título)

See also: Property editor.

An object is usually derived from a base object. You should not list the properties that are inherited from that base object. See for example Draft Wire.

Data

Property Group

  • DatosProperty Name 1 (PropertyType): Description of the property. (Editor note: to find the PropertyType select Show all in the context menu of the Property editor. The tooltip of each property will then include this information. But the PropertyType can also be found in the source code.)

View

Property Group

  • VistaProperty Name 2 (PropertyType): Description of the property.

Archivos de guión

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

The ExampleCommandModel tool can be used in macros and from the Python console by using the following function:

Object = makeExampleCommandModel(Data1, Data2)
  • Creates an Object using Data1 and Data2.

Ejemplo:

import FreeCAD, Base

Model = Base.makeExampleCommandModel(FreeCAD.Data1, FreeCAD.Data2)

Otros (opcional)

!

Optional.

Selectable block

<languages/>
{{UnfinishedDocu}}
<translate>

{{Docnav
|[[Base_PreviousCommand|PreviousCommand]]
|[[Base_NextCommand|NextCommand]]
|[[Workbench_Name|Workbench]]
|IconL= <!--filename of icon with extension (e.g. svg, png)-->
|IconR= <!--filename of icon with extension (e.g. svg, png)-->
|IconC= <!--filename of icon with extension (e.g. svg, png)-->
}}

{{GuiCommand
|Name=Base ExampleCommandModel
|Icon= <!--filename of icon with extension (e.g. svg, png) if not the same name as command-->
|MenuLocation=Menu → Submenu → Menu text for the command
|Workbenches=[[Workbench_Name|Workbench]]
|Shortcut={{KEY|F}} {{KEY|C}}
|Version=0.19
|SeeAlso= <!--add links to similar commands and related pages-->
}}

== Description ==

While the page is under construction, add the [[Template:UnfinishedDocu]] template at the top of the page by simply typing: '''{{UnfinishedDocu}}'''

In this first paragraph give a short description of what the command does. The description can refer to other workbenches such as the [[Image:Workbench_Sketcher.svg|24px]] [[Sketcher_Workbench|Sketcher Workbench]]. (''Editor note:'' The image is 24px, not 16px)

Remember to use [[Template:Version]], [[Template:VersionMinus]], [[Template:VersionPlus]] and [[Template:Obsolete]] when applicable.

For example: The {{incode|App::Link}} feature ({{Version|0.19}}) allows linking between sub-assemblies etc...

Add an image if possible, and please follow the guidelines in [[WikiPages#Graphics]]. Example taken from [[Part_Sweep|Part Sweep]]:
</translate>
[[Image:Part_Sweep_simple.png|none]]
<translate>
{{Caption|Optional: add a caption below the image to explain what the tool does}}

Closing and opening translate tags should surround images, and other fixed elements, if they don't need to be translated. The caption should always be translated.

== Usage ==

# There are several ways to invoke the command: 
#* Press the {{Button|[[Image:Std_Open.svg|16px]] [[GuiCommand_model|Base ExampleCommandModel]]}} button. (''Editor note:'' This uses the [[Template:Button]] template, it is necessary to link to the command as shown in this example)
#* Select the {{MenuCommand|Menu → Submenu → [[Image:Std_Open.svg|16px]] Menu text for the command}} option from the menu. (''Editor note:'' This uses the [[Template:MenuCommand]] template)
#* Select the {{MenuCommand|Submenu → [[Image:Std_Open.svg|16px]] Menu text for the command}} option from the [[Tree_view|Tree view]] context menu or [[3D_view|3D view]] context menu. (''Editor note:'' This also uses the [[Template:MenuCommand]] template, not all commands can be accessed from a context menu)
#* Use the keyboard shortcut {{KEY|F}} then {{KEY|C}} or {{KEY|Ctrl}}+{{KEY|Z}}. (''Editor note:'' This uses the [[Template:KEY]] template, not all commands have a keyboard shortcut)
# Detailed steps as needed. Some steps may need {{KEY|Keyboard}} presses while others may require using the mouse to click on a {{Button|Button}}.
# Set options and press {{Button|OK}}.

== Options ==

* Optional. List the command options here. See for example [[Draft_Wire|Draft Wire]].

== Example ==

Optional.

== Notes ==

* Optional. Use a bullet list if there are multiple items. You can also mention limitations here.

== Properties ==

See also: [[Property_editor|Property editor]].

An object is usually derived from a base object. You should not list the properties that are inherited from that base object. See for example [[Draft_Wire#Properties|Draft Wire]].

=== Data ===

{{TitleProperty|Property Group}}

* {{PropertyData|Property Name 1|PropertyType}}: Description of the property. (''Editor note:'' to find the {{Value|PropertyType}} select {{MenuCommand|Show all}} in the context menu of the [[Property_editor|Property editor]]. The tooltip of each property will then include this information. But the {{Value|PropertyType}} can also be found in the source code.)

=== View ===

{{TitleProperty|Property Group}}

* {{PropertyView|Property Name 2|PropertyType}}: Description of the property.

== Scripting ==

See also: [https://freecad.github.io/SourceDoc/ Autogenerated API documentation] and [[FreeCAD_Scripting_Basics|FreeCAD Scripting Basics]].

The ExampleCommandModel tool can be used in [[Macros|macros]] and from the [[Python|Python]] console by using the following function:

</translate>
{{Code|code=
Object = makeExampleCommandModel(Data1, Data2)
}}
<translate>

* Creates an {{incode|Object}} using {{incode|Data1}} and {{incode|Data2}}.

Example:

</translate>
{{Code|code=
import FreeCAD, Base

Model = Base.makeExampleCommandModel(FreeCAD.Data1, FreeCAD.Data2)
}}
<translate>

== Other ==

Optional.


{{Docnav
|[[Base_PreviousCommand|PreviousCommand]]
|[[Base_NextCommand|NextCommand]]
|[[Workbench_Name|Workbench]]
|IconL= <!--filename of icon with extension (e.g. svg, png)-->
|IconR= <!--filename of icon with extension (e.g. svg, png)-->
|IconC= <!--filename of icon with extension (e.g. svg, png)-->
}}

</translate>
{{Workbench_Tools_navi{{#translation:}}}} <!--use the Tools navi belonging to the workbench -->
{{Userdocnavi{{#translation:}}}}


Template:Workbench Tools navi/es