Fasteners ChangeParameters

From FreeCAD Documentation
Revision as of 17:28, 5 April 2024 by Roy 043 (talk | contribs) (Docnav)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Other languages:

Fasteners ChangeParameters

Menu location
Fasteners → Change fastener parameters
Default shortcut
Introduced in version
See also


The Fasteners ChangeParameters command can be used to change the parameters of fasteners.


  1. Select one or more fasteners. If multiple fasteners are selected they must be either only screws, only washers or only nuts.
  2. There are several ways to invoke the command:
  3. The Change fastener parameters task panel open.
  4. Optionally change the Fastener type.
  5. Optionally change the diameter by doing one of the following:
    • Check the Auto set diameter checkbox to match the diameter of the fasteners with the edge they are attached to.
    • Uncheck the Auto set diameter checkbox and select a Diameter from the dropdown list.
  6. Leave the Set length check box unchecked. This option currently does not work.