FEM tutorial/de: Difference between revisions

From FreeCAD Documentation
(Created page with "Du kannst auch ein Netz auf eine Mechanische Analyse ziehen und ablegen, die kein Netz in der Baumansicht hat.")
(Created page with "==== GMSH ==== Die Verwendung des Makros von psicofil wird empfohlen und wird für dieses Beispiel verwendet. # Aktiviere das Makro # Wähle das Objekt aus, das du verwenden m...")
Line 45: Line 45:


==== GMSH ====
==== GMSH ====
Die Verwendung des Makros von psicofil wird empfohlen und wird für dieses Beispiel verwendet.
The usage of psicofil's macro is recommended, and is used for this example.
# Aktiviere das Makro
# Activate the macro
# Wähle das Objekt aus, das du verwenden möchtest, in diesem Fall unseren Wüprfel
# Select the object you wish to use, in this case our Cube
# Hake das Kästchen '''Mechanische Analyse aus dem Netz erstellen''' an
# Check the box '''Create Mechanical Analysis from mesh'''
# Click '''OK'''
# Klicke auf '''OK'''


We have now meshed our object and are ready to add constraints and forces.
We have now meshed our object and are ready to add constraints and forces.

Revision as of 12:48, 18 October 2020

Tutorium
Thema
Finite Element Analyse
Niveau
Anfänger
Zeit zum Abschluss
10 Minuten + Löserzeit
Autoren
Drei
FreeCAD-Version
0.16.6700 oder höher
Beispieldateien
Siehe auch
None

Einführung

Dieses Tutorium soll den Leser in den grundlegenden Arbeitsablauf des FEM Arbeitsbereichs sowie in die meisten Werkzeuge einführen, die zur Durchführung einer statischen Analyse zur Verfügung stehen.

Anforderungen

Prozedur

Modellierung

In diesem Beispiel wird ein Würfel als Studienobjekt verwendet, aber stattdessen können auch Modelle verwendet werden, die in den Part oder PartDesign Arbeitsbereichen erstellt wurden.

  1. Erstelle ein neues Dokument
  2. Aktiviere den Formteil Arbeitsbereichs
  3. Erstelle einen Würfel
  4. Ändere seine Abmessungen wie folgt:
    1. Höhe: 1.000 mm
    2. Länge: 8.000 mm
    3. Breite: 1.000 mm

Wir haben nun ein Modell, mit dem wir im Folgenden arbeiten können.

Erstellen der Analyse

Netgen

  1. Wähle das Modell
  2. Klicke auf Neue mechanische Analyse aus dem Menü, um eine Analyse aus dem ausgewählten Objekt zu erstellen
  3. Klicke im Vernetzungsdialog auf OK

Du kannst auch ein Netz auf eine Mechanische Analyse ziehen und ablegen, die kein Netz in der Baumansicht hat.

GMSH

Die Verwendung des Makros von psicofil wird empfohlen und wird für dieses Beispiel verwendet.

  1. Aktiviere das Makro
  2. Wähle das Objekt aus, das du verwenden möchtest, in diesem Fall unseren Wüprfel
  3. Hake das Kästchen Mechanische Analyse aus dem Netz erstellen an
  4. Klicke auf OK

We have now meshed our object and are ready to add constraints and forces.

Constraints and Forces

  1. Hide the mesh from the Tree View.
  2. Show the original model
  3. Select Create FEM fixed constraint
  4. Select the back face of the Cube (face on the YZ axis) and click OK
  5. Select Create FEM force constraint
  6. Select the front face of the Cube (the face parallel to the back face) and set the Area load value to 9000000.00
  7. Set the Direction to -Z by selecting one of the face edges parallel to that direction.
  8. Click OK

We now have established the restrictions and forces for our static study.

Final preparations

  1. Select Mechanical material... and choose Calculix as the material
  2. Click OK

Running the Solver

Standard Procedure

  1. Select the solver object contained in the Mechanical Analysis
  2. Select Start calculation from the menu
  3. Select Write Calculix Input File
  4. Select Run Calculix
  5. Click Close

Quick Procedure

  1. Select the solver object contained in the Mechanical Analysis
  2. Click on Quick Analysis.

Analyzing Results

  1. From the Object Tree, select the Results object
  2. Select Show result
  3. Choose among the different Result types to view the results
  4. The slider at the bottom can be used to alter the mesh visualization. This allows us to visualize the deformation experienced by the object, keep in mind that this is an approximation.
  5. To remove the results select Purge results
Comparison to previous example file

If you select the Z displacement result type, you can see that the obtained value is almost identical to the test example provided by FreeCAD. Differences may occur due to the quality of the mesh and the number of nodes it possesses.


Wir sind nun mit dem grundlegenden Arbeitsablauf für das FEM Modul fertig.

Template:Tutorials navi/de