FEM GleichungStrömung

From FreeCAD Documentation
Revision as of 09:23, 26 October 2022 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

FEM EquationFlow

Menu location
Solve → Flow equation
Workbenches
FEM
Default shortcut
None
Introduced in version
0.19
See also
None

This equation calculate viscous fluid flows using the Navier-Stokes equations.

For info about the math of the equation, see the Elmer models manual, section Navier-Stokes Equations.

Usage

  1. After adding an Elmer solver as described here, select it in the tree view.
  2. Now either use the toolbar button or the menu Solve → Flow equation.
  3. Change the equation's solver settings or the general solver settings if necessary.

Solver Settings

For the general solver settings, see the Elmer solver settings.

The flow equation provides these special settings:

Constraint Information

The electrostatic equation takes the following constraints into account if they are set:

Note

Except for calculations in 2D, for all above constraints it is important that they act on a face or body. Constraints for 3D set to lines or vertices are not recognized by the Elmer solver.